Buildem336
Heliman
Location: Vista Ca
My Posts This: Topic Forum | I tried these Ds450 servos on my blade 400 and wow they are really good. First thing I noticed that they were smaller, lighter, faster and made way more torque than the HS-65mg servos I was using before plus they are also metal gear and Digital and the price is also right. The HS-65MG at 4.8v is 0.14sec and the DS 450 at 4.8v is 0.12. They can handle 6v without a problem. In flight they feel more responsive and more locked in especially under load like doing 4 point tic tocs. Under power if I push on the swashplate there is zero movement they center awesome. I am also running a CC BEC. The servo leads are shorter so for the back ones that was perfect since they are so close to the RX less wire to worry about and for the front I used a short servo extention. Just thought you guys would like to know of another servo option for our helis. Here are some pics
http://www.neumotors.com/store/page8/page8.html
Notice the room between the servos
I had to oval the hole a little since they are a tad shorter.
 |
)
