RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 868 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page640 viewsPOST REPLY
HeliProz . Ron’s HeliProz South . MTA Hobbies

.
.
Graupner Koala-Bell 230-Elektro Skaler > Uni Mechanics 2000
 
 
DWyn
Heliman
Location: FAREHAM, Hants - UK

My Posts This: Topic  Forum		I have just satrted kitting out a set of mechanics to go in an Augusta 109, does anyone have any photos of the servo wiring layout they have used. I am concerned that either the wiring is near the gears/shafts or too near the exhaust.
04-18-2009 10:22 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
tim deakin
Veteran
Location: gloucestershire uk

My Posts This: Topic  Forum		I'm sorry its not very clear, I will have a look tomorrow to see if I can find any more.
04-18-2009 10:38 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
DWyn
Heliman
Location: FAREHAM, Hants - UK

My Posts This: Topic  Forum		Thanks
04-18-2009 11:28 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
DWyn
Heliman
Location: FAREHAM, Hants - UK

My Posts This: Topic  Forum		Tim do you double the servo leads back on them selves and bring them out through the servo opening that the servo is in on the left hand frame?

Any other tips with the construction, Martin has been very helpfull and I got the complete Unistar 2000 heli from him as the donor mechanics. Intend to set them up fully and then fit them into the body.
04-19-2009 07:29 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
tim deakin
Veteran
Location: gloucestershire uk

My Posts This: Topic  Forum		Hi DWyn, I will get the heli out of storage later and have a look. I tried to find some photos but none where any help.

There are a couple of tips I can give you, are you going to use the wire drive?
04-19-2009 08:12 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
DWyn
Heliman
Location: FAREHAM, Hants - UK

My Posts This: Topic  Forum		Tim,

I intend to use the wire drive at the moment. And will probably use a 4 bladed Robbe head and Vbar stabaliser.

Trex 250, 450, 600E&N MSH Protos and Blitz Avro
04-19-2009 08:25 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
tim deakin
Veteran
Location: gloucestershire uk

My Posts This: Topic  Forum		That sounds great! I often considor changing mine to a 4blade head- we shall see!

The wire drive is fine providing you dont run it straight.
04-19-2009 08:36 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
MichaelP
Key Veteran
Location: Northumberland UK

My Posts This: Topic  Forum		The instructions will mention the curve in the tail drive shaft.

http://www.webstarts.com/micksscalehelicopters
04-19-2009 07:47 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page640 viewsPOST REPLY
Model Rectifier Corp . ReadyHeli . Power Helis

.
.
Graupner Koala-Bell 230-Elektro Skaler > Uni Mechanics 2000
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 9:13 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF