RunRyder RC Helicopter Topic - Hirobo Chinook E Conversion Photos

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 595 ONLINE 18 EVENTS SEARCH REGISTER START HERE

1 page

701 views

POST REPLY

Mikado Modellhubschrauber	.	Futaba-RC	.	Boca Bearings
	.		.

Tandem Rotor Helis Vertol Chinook > Hirobo Chinook E Conversion Photos

autorotater
Heliman
Location: California

My Posts This: Topic Forum

Hey guys I have been noticing lately that the electric motor on my chinook seems to be really warm when I am done with a flight. It is warm enough that you can't hold your hand on it. I will get a temp reading on my next flight but is anyone elses motors doing this? Is it something to be concerned about or is it normal?

03-07-2009 10:46 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

avconslt
Senior Heliman
Location: Houston, Texas

My Posts This: Topic Forum

Hi Dan,

Mine gets hot as well, which is not surprising as we are running a little more voltage than it is rated for! However, I have not had any problems with mine! No discoloring or hot smell! So, I guess it is alright! How is your flight training going?

Richard

o

03-08-2009 04:38 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

autorotater
Heliman
Location: California

My Posts This: Topic Forum

Hey Richard, good to hear from you and thanks for the info. I feel better flying knowing that. As for the flight training I had to come out of sere 5 days before graduating due to an illnes. I go back on the 16th and have to start it over from the beginning booooooh. But when I come out the other end we will be starting to fly finally on April 14th. So finally we are getting to the good stuff. Hope all is well with you buddy.

03-08-2009 04:59 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Turbinator
Senior Heliman
Location: Nanticoke, PA

My Posts This: Topic Forum

Mine gets hot too, we are running them 1 cell more then recomended. I took temp readings and they are within reason although approach and slightly exceed max recomended temps. I have about 60-70 12 minute flights on mine and no known problems so far.

03-09-2009 02:01 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

autorotater
Heliman
Location: California

My Posts This: Topic Forum

Thanks for the info I really appreciate the info as I am trying to make sure everything is good. After fixing the problem of the front main shaft pulling down I want to make sure I don't have any more incidents. I just fixed the damage I had to the fuse and have dont my first test flights with the fuse back on. Everything seems to be going well. I haven't painted the blades yet but will soon. I am using the swift blades right now as they are really inexpensive but I will probably be looking for some other blades as these are just to light and make the heli a bit twitchy in any kind of wind. Here are some photos from my test flight.

Daniel

03-09-2009 06:51 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

doorman
Elite Veteran
Location: E.Berne, NY

My Posts This: Topic Forum

Yet Another!!!!!!!!!!!!!!

I think it is great to see all of these new machines in the air!!!!!
Great job...... Stan

Team Hirobo/MRC --- RCLIGHTS.NET ----- If there is a cure for this, please don't tell me about

03-09-2009 11:02 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

autorotater
Heliman
Location: California

My Posts This: Topic Forum

Thanks for the compliment Stan. Here is a short video of some ground taxi and hovering test. Seems to be flying well.

http://www.youtube.com/watch?v=9wsPMITa8CQ

03-11-2009 02:44 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

1 page

701 views

POST REPLY