jcer93705
Heliman
Location: fresno california USA
My Posts This: Topic Forum | i lost the tail, luckily i was burly hovering. On page 4 on the manual as you can see there is two pin. The bottom pin that hold the little gear(pulley) that grip the tail belt came off. There should be atleast a screw with a nut, but instead there was a pin. So be aware with that. Eventually it will fall off on flight and cause a crash. There is another pin too on that same shaft. Luckily i found the pin that goes to the pulley on the ground. I stuck it back, but pin was loose. So i added a weee bit of 5 min expoxy for a fast fix. This was on m40-08341-10N. Now the second pin M34-10141-001 hope i don't go through the same problem. But i think i should double check and add a bit of expoxy. I think i should track all these pins. It's all good anyways. Hope it doesn't stop people from buying it. I think pegasus is a cute neat machine once I set her up perfectly but i'm a dum head for this. But I have learned alot since the first day i open up the box. 
Anyways yea, i tried jr sport st47bb, i baught it to use for the tail mean time. But I now got these super fast standard digital Hyperion Atlas Digital Programmable servo. I'm getting 0.07sec. And xmhobbies g401b digital gyro. Which worked so great on my Helipro Black hawk 500ep. Now I am using that gyro on pegasus, and on helipro black hawk 500 ep i'm using that black esky professional gyro. Xmhobbies g401b is a killer gyro some people doesnt' know the different between xmhobbies g401b and 401 from futaba.
Anyways doorman, take some pic and post what ever pic you want or half of you're ep conversion, and nitro heli in those cool bodies. Give us some detail since this is the pegasus topic. Also Yea I'm using old jr servos in pegasus, but work perfectly. Plan to buy more of that bb jr sport servo that i used for tail as temporary so i can use it through out except tail, it now uses nice digital servos. |
