hdskullfire2
Senior Heliman
Location: Bethlehem, Pa.
| Here is a shot showing the Quick-UK header tank. I used the Quick-UK header tank mounting kit to offset the tank to clear the main tank. Makes for a clean install.
Plumbing is simple.
On a YS91SR engine, pressure goes from the crankshaft cover nipple direct to main tank vent with the one way valve in-between. Main tank feed goes direct to the header tank vent. And, finally the carb feed comes off the header tank main feed through a JR three way T filter (the extra loop is my fuel-fill line with a clamp after the filter going to the carb.
Steve
Your next stop, the Twilight Zone. Now get'a move on....Hey, get me a cold one first..!! |
