Topic SubscribeRC Helicopter Event Summary
WATCH  1 page1843 viewsPOST REPLY
Mikado . Futaba-RC . HeliProz
. .

e-
Blade Series RC Helicopters
 >

Blade 400
3D DX6i-->convert mode 1 to mode 2?
Flyby

Heliman

Oslo, Norway

I recently smashed up my Blade 400 and in order to keep flying, I decided to look for a backup Blade!
I did find a very good deal on a complete kit but when I openen the box I found the trans is a mode 1!

The fault is all mine so I`m kinda stuck with this trans. I really would like to swap modes but can it be done?.

Has anyone tried this??

They said 'Cheer up - things could be worse.' So I cheered up...and sure enough, things got worse!!

01-27-2009 Over year old.
HOMEPAGE  
StevenT

Veteran

Dallas, GA USA

I'm not sure what you mean by Mode 1 and Mode 2. You mention a transmitter for the B400; is it the DX6i? Additional information would be helful in diagnosing your problem.


Steven

Shhh, don't tell the wife.

01-27-2009 Over year old.
Flyby

Heliman

Oslo, Norway

Sorry if I was a bit unclear. Yes, it`s a DX6i!
The transmitter is set up as mode 1. The throttle/aileron is on the right stick and elevator/rudder is on the left!

I know some transmitters can be swapped and wonder if its easy to do on the DX6i!

They said 'Cheer up - things could be worse.' So I cheered up...and sure enough, things got worse!!

01-27-2009 Over year old.
HOMEPAGE  
Dood

rrProfessor

Wescanson

01-27-2009 Over year old.
Flyby

Heliman

Oslo, Norway

Oh man, that is just excelent Way better than I could ever have hoped for!!
Thank you Dood

They said 'Cheer up - things could be worse.' So I cheered up...and sure enough, things got worse!!

01-27-2009 Over year old.
HOMEPAGE  
WATCH  1 page1843 viewsPOST REPLY
Boca Bearings . YUNEEC USA . AMain.com
. .

e-
Blade Series RC Helicopters
 >

Blade 400
3D DX6i-->convert mode 1 to mode 2?
 Print TOPIC Advertisers 

Topic Subscribe

Tuesday, December 23 - 2:56 am - Copyright © 2000-2014 RunRyder   EMAILEnable Cookies