RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 517 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page780 viewsPOST REPLY
Hobby Hut . Heli Wholesaler . JR-Spektrum

.
.
e-Zoom, Shogun, Dolphin > Main Gear
 
 
garrcass
Heliman
Location: Redding CA

My Posts This: Topic  Forum		how much play is normal on a shogun main gear mine has about 1.5 mm of play i dont mean loose on the shaft but like wiggle in the gear ?

Garrett
10-19-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Heli 770
rrProfessor
Location: Lemon Grove, Ca. USA.

My Posts This: Topic  Forum		garrcass
Are you saying the gear is warped or moving it up and down with your finger?
10-19-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
garrcass
Heliman
Location: Redding CA

My Posts This: Topic  Forum		no its not warped but imagine if it was warped the way one side would move up and one down thats the way i have play like grab the heli with one hand and put pointer finger on the left side of the gear on the left side of the heli and put your thumb on the right side of the heli on the right side of the gear and wiggle it up and down like it would if it was warped i have signifigant play here but not on the actual shaft any comments ? i dont know all the caracteristics of the shogun i am wondering if this is one of them

Garrett
10-19-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Heli 770
rrProfessor
Location: Lemon Grove, Ca. USA.

My Posts This: Topic  Forum		All of mine will do that. If you notice on the top side of the gear it will rub on the frame and create white dust from the gears, To the front of the frame I'll file down the frame on both sides so the gear will clear the frame, on the back side I leave the frame as is on both sider, This keeps the main gear level for the pinion gear.
10-19-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
garrcass
Heliman
Location: Redding CA

My Posts This: Topic  Forum		good idea i was thinking about some sanding but didint want to add to the problem but yes leaving the rear slots would keep the gear relatively straghit and sanding the front would eliminate some friction

Garrett
10-19-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page780 viewsPOST REPLY
E-flite . Fast Lad Performance . Ace Hobby

.
.
e-Zoom, Shogun, Dolphin > Main Gear
 
 
hueyman
Senior Heliman
Location: Joliet, Il.

My Posts This: Topic  Forum		I've replaced the main gear 4 times and all of them have the same movement you described. Doesn't seem to effect anything after they "wear" in. almost seems as though the hole for the one way bearing is not drilled perpendicular to the gear. Glad to hear shoguns are still in the air.

Huh?
10-19-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page780 viewsPOST REPLY
Hobby Hut . Heli Wholesaler . JR-Spektrum

.
.
e-Zoom, Shogun, Dolphin > Main Gear
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 11:58 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF