RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 805 ONLINE 76 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]2184 viewsPOST REPLY
Midland Helicopters . HeliProz . Ron’s HeliProz South

.
.
After Market Accessories > K&S Tail Brace Support Bridge
 
 
TooLy
Veteran
Location: Israel

My Posts This: Topic  Forum		HI,

I would like to get Tail Brace Support Bridge for my T-rex 700N.
Anybody know what tube diameter does it fit ? the 700N braces are 6mm.

I saw someone using this in his Vibe 90, but he had to open it a little since it was small.

From what I searched, I understand there is only one size, KS-0535.

Thanks,
Roei




~Roei~
10-14-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
brcg123
Key Veteran
Location: Wagoner OK USA

My Posts This: Topic  Forum		I dont know what size the 700 is, but, i put one on my trex 600n, and it fits it, with kinda mashing the size down a little. I also put one on my raptor titan, had to spread it, to fit it, and i bought them both at the same time, yet one size does pretty much fit all. if you want to put one on there, I would order one, cause I think they are the only manufacturer to make them, and you can make them fit any diameter.








Trex700N, Trex600N, Raptor70, RaptorTitan, GMPCrickett, Visa
10-15-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
BLUETHUNDER
Veteran
Location: Glass City

My Posts This: Topic  Forum		Someone needs to come up with a new design that fits
the various heli sizes better, not a one design fits
all part that only works for half the helis out there?
The K&S one did not fit my Vibe 50 without cutting it
down shorter to fit inside the boom supports.


How about one for a 450 size (Next D makes one for the Rave)
One for a 500 size
one for a 30 - 50 size (K&S works but not for Hirobo EVO 50)
One for a 90 size Small support tube aprox 6mm
one for a 90 size large support tube aprox 8mm - 9mm

This new boom support bridge could be made from
Plastic
Fiberglass like G - 10
Carbon Fiber or
Aluminum, anodised in any color you want!
10-16-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
TooLy
Veteran
Location: Israel

My Posts This: Topic  Forum		Finally, that's the only thing fits the 700

http://www.helidirect.com/product_i...roducts_id=8500

~Roei~
10-16-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Helipilot01
Senior Heliman
Location: ColliervilleTn

My Posts This: Topic  Forum		I think this is exactly what your looking for!!!

http://fortunemodelproducts.com/tai...racebridge.html
10-16-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
BLUETHUNDER
Veteran
Location: Glass City

My Posts This: Topic  Forum		I like the clamping design for the support tubes
but this is a one design only for the T Rex 700
Someone needs to come up with a design like this
maybe with a removable plate that clamps to the
boom support like this design but would be easier
to install or adjust, and make it adjustable for
various widths like the K & S plastic bridge is.
10-16-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
PJRono
Veteran
Location: Land of 10,000+ Mosquitos!

My Posts This: Topic  Forum		The KSJ is made to be put in hot water (boiling) then wrapped to the support to form to it.

"There is no replacement for displacement!"
10-17-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
zack108
Senior Heliman
Location: baltimore

My Posts This: Topic  Forum		what is the purpose of this just to hold the boom supports together?

zack
12-31-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
PJRono
Veteran
Location: Land of 10,000+ Mosquitos!

My Posts This: Topic  Forum		It stops the long boom supports from vibrating and makes the boom more solid.

"There is no replacement for displacement!"
12-31-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Brokenlink
Key Veteran
Location: Oakdale,Ca.

My Posts This: Topic  Forum		FMP makes them also in red blue and black.
http://www.runryder.com/helicopter/...?top=1230859783

Experience is a hard teacher because she gives the test first, the lesson afterwards. ...
01-02-2009 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Heli 770
rrProfessor
Location: Lemon Grove, Ca. USA.

My Posts This: Topic  Forum		Microheli makes them for the 700N alum. CNC Bling!
01-02-2009 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Brokenlink
Key Veteran
Location: Oakdale,Ca.

My Posts This: Topic  Forum		Hey that one from microheli is cool,way different than all the others.Horizon Hobbies carries all Microheli stuff.


FMP


Experience is a hard teacher because she gives the test first, the lesson afterwards. ...
01-02-2009 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
J3DI
Veteran
Location: Oswestry UK(52.865648N 3.033982W)

My Posts This: Topic  Forum
Quote 
what is the purpose of this just to hold the boom supports together?

Also, if you've ever had a boom support come loose then this will make landing a little easier...
01-06-2009 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

My Posts This: Topic  Forum		Folks, what is the outer diameter of the 700N boom supports??

...Once upon a time there were Nitros, flybars and frequency pins...
01-13-2009 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
J3DI
Veteran
Location: Oswestry UK(52.865648N 3.033982W)

My Posts This: Topic  Forum		Mine measure 6.03mm...
01-13-2009 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
GREYEAGLE
Key Veteran
Location: Sioux City IA

My Posts This: Topic  Forum		Make yer own.

I've got a couple of K.S.'s --

Then I got showed how to make one just by cutting a piece of fiberglass pushrod tubing or old carbon tube to the exact width.

Then doubling back on a pair of cable ties threading them thru the hole in the tube. You can even knotch the tube to fit the radius of the support tube.

greyeagle
01-13-2009 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Chickenrun
Senior Heliman
Location: England UK, not RIP off Europe.

My Posts This: Topic  Forum
Quote 
I would like to get Tail Brace Support Bridge for my T-rex 700N.
Anybody know what tube diameter does it fit ? the 700N braces are 6mm.

I saw someone using this in his Vibe 90, but he had to open it a little since it was small.

From what I searched, I understand there is only one size, KS-0535.

Thanks,
Roei




This fits the Trex 700

Trex 700/600's, OSHZ, Futaba BLS 251-252-253, GV1's, GY520's, Spektrum, Bantam BC8DX8
01-14-2009 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

My Posts This: Topic  Forum		If anyone has the Microheli one could you pleae measure the distance to where each boom support would contact the inside please? I would like to see if this is useable for another heli, thank you!!

...Once upon a time there were Nitros, flybars and frequency pins...
01-14-2009 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
zzr
Heliman
Location: California

My Posts This: Topic  Forum		Microheli Tail boom brace come loose cuz carbon fiber tail boom upgrade rod is smaller than stock?
11-16-2009 07:56 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Saint728
rrProfessor
Location: Honolulu, Hawaii

My Posts This: Topic  Forum		The K&S ones fit even 90 size boom supports. All you need to do it dip them in boiling hot water for a few seconds then snap them on. Just dip the ends in one at a time then put them together after they are on the boom support.

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
MA Fury Extreme
Raptor 50 SE
11-16-2009 05:28 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]2184 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . EDGE Rotorblades

.
.
After Market Accessories > K&S Tail Brace Support Bridge
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, March 15 - 4:13 am - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF