Topic Subscribe
WATCH  4 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ]9919 viewsPOST REPLY
Heli-Max . Scorpion Power System . Ron's RC Helicopters
. .

AHF-RC Aeolus 50 3D

 >

Aeolus 50 3D will comeing soon!!!!! 3D flight DV new!!

Eury

rrProfessor

Nottingham NH

It's an interesting heli. If you go to their page you can download the build manual. It's got some parts similar to a T-rex, but it's not the same. The fan is on double collets, It uses an A-arm type elevator link, that strange engine mount design (looks better than the 600N engine mount to me), and the frame setup doesn't use a baseplate, it appears that you can drop the engine with the pipe on it without removing any other components. Also, the front radio tray setup is nice as well.

Other than that, the head and tail look identical to the T-rex, and it looks like it's got the same hollow paddles with stickers.

Looks nice, we'll see if they get a US distributor and what the price is like. From the way it's worded on their page, it sounds like it comes with the electronics, but the manual shows it just like every other heli, with no electronics included.

Nick Crego

Citizen #0168

11-05-2008 Over year old.
Bubba Gump

Senior Heliman

Dayton, Oh

Any worb yet on pricing?

11-12-2008 Over year old.
blade3d

Elite Veteran

New Jersey USA

Yeah whats up with that can't they see their is an interest here.

Blade3d

11-14-2008 Over year old.
Bubba Gump

Senior Heliman

Dayton, Oh

did you get an email back.

11-17-2008 Over year old.
blade3d

Elite Veteran

New Jersey USA

No

Blade3d

11-18-2008 Over year old.
blade3d

Elite Veteran

New Jersey USA

Check it out,, do they want to sell it or keep it for them selves I don't get it.

Blade3d

11-20-2008 Over year old.
fiordaliso

Senior Heliman

Bregenz/Austria

Well cool to mount the horizontal fin that way ...

11-20-2008 Over year old.
red_z06

rrProfessor

Dumont, NJ

The fan is on double collets, It uses an A-arm type elevator link, that strange engine mount design (looks better than the 600N engine mount to me), and the frame setup doesn't use a baseplate, it appears that you can drop the engine with the pipe on it without removing any other components. Also, the front radio tray setup is nice as well.
The fan hub is a single (bottom) collet type. The engine with pipe can be dropped if you remove the landing struts first. It will still require a ball end hex if you want to drop the engine with the pipe.

Entire head is much similar to Trex600 basic head. The flybar cage end caps are plastic vs aluminum on Trex600. One big plus I see is that frame (one side) replacement will require undoing 34 screws without touching any of the electronics. This will save some time during repairs.

www.JustinJee.com

11-23-2008 Over year old.
HOMEPAGE  
red_z06

rrProfessor

Dumont, NJ

Does anyone what the price of a kit is? Also wondering what it weighs?
According to Hi-Flier, it will be inline or around with Trex600N basic. AUP minus 3 cyclic servo, governor came in at 3.3kg, so it will be around 3.5kg.
Tourque tube, belt driven???, there was no show of tail mechanics so curious.
It is belt driven with components very similar to Trex600 basic tail. It does come with grip similar to Trex600 thrusted grip. Due to the electronics pod design, there is absolutely no wiring over the CF frame area. If you have a scond heli as a back up, it would be a matter of 10 screws to remove the elec pod and move it to a backup heli. Let see if it holds up to some abuse.

www.JustinJee.com

11-25-2008 Over year old.
HOMEPAGE  
red_z06

rrProfessor

Dumont, NJ

Tourque tube, belt driven???
I spoke too early. They have both belt and TT drive.

www.JustinJee.com

11-28-2008 Over year old.
HOMEPAGE  
blade3d

Elite Veteran

New Jersey USA

I thought so,,,nice

Blade3d

11-28-2008 Over year old.
red_z06

rrProfessor

Dumont, NJ

Here is a completed Aeolus 50 3d specs and some photos.

Engine: OS 50 Hyper
Muffler: Hatori SAB-50
Cyclic: Hitec 7975HB
Gyro: Futaba GY611 & 9256
Regulator: Align 2 in 1
Governor: Align G600
Receiver Pack: TP 2s2p2640mah
Blade: SWE 600mm
Weight: 3.5kb or 7lb 12oz(with blade holder)

www.JustinJee.com

12-07-2008 Over year old.
HOMEPAGE  
blade3d

Elite Veteran

New Jersey USA

Nice

Blade3d

12-07-2008 Over year old.
rsalazar

Elite Veteran

Florida, USA

Nice!!!

red_z06, Where did you get it?

03-08-2009 Over year old.
red_z06

rrProfessor

Dumont, NJ

We got it from http://www.ahf-rc.com

www.JustinJee.com

03-08-2009 Over year old.
HOMEPAGE  
rsalazar

Elite Veteran

Florida, USA

Thanks for the info

03-10-2009 Over year old.
red_z06

rrProfessor

Dumont, NJ

It seems the proper pronounciation of the word is difficult.

Here is how it is pronounced with "a" being silent.

http://dictionary.reference.com/browse/aeolus

www.JustinJee.com

04-08-2009 Over year old.
HOMEPAGE  
darkfa8

Elite Veteran

Brick, NJ - USA

us distributor is http://www.ahf-usa.com

- Dan Goldstein

04-08-2009 Over year old.
HOMEPAGE  
Isaac F

Key Veteran

Panama Republic of Panama

When do this people will do some advertizing here in RR?


.

Speed of light is greater than speed of sound. Some people seem very bright until U hear them speak

04-09-2009 Over year old.
cmsilvoy

Key Veteran

Durham, NC

Very soon......

04-09-2009 Over year old.
WATCH  4 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ]9919 viewsPOST REPLY
Thunder Power RC . Mikado . Futaba-RC
. .

AHF-RC Aeolus 50 3D

 >

Aeolus 50 3D will comeing soon!!!!! 3D flight DV new!!

 Print TOPIC Advertisers 

Topic Subscribe

Wednesday, August 20 - 5:50 am - Copyright © 2000-2014 RunRyder   EMAILEnable Cookies