RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 413 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page628 viewsPOST REPLY
Ron’s HeliProz South . MTA Hobbies . Model Rectifier Corp

.
.
Gohbee Aviation Stinger 30-90 > flap dampers
 
 
airborne r/c
Senior Heliman
Location: Fort Rucker, AL

My Posts This: Topic  Forum		how will i know if my flap dampers go bad? does it cause vibe and tracking prolbems?

If Your Going To Hit The Ground Hit It Hard
08-09-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
FLYINFOOL
Key Veteran
Location: Cudahy, WI

My Posts This: Topic  Forum		Bad dampers will cause tracking problems, I never had a set cause vibration other than that caused by the tracking.


Jeff Borowski
Gohbee Field Rep
08-10-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
airborne r/c
Senior Heliman
Location: Fort Rucker, AL

My Posts This: Topic  Forum		Ok that didn't fix the prob, no worse no better. The bird shakes mildly violent and it comes and goes in flight and a hover. I have replaced the fly bar, blades, spindle, main shaft, blades, and dampers. It goes in and out of track like it’s a bent spindle. When it is in track its nice and smooth.

New metal head upgrade
New OS Hyper 50
New all metal tail gear box

I did all 3 upgrades at the same time and since I have replaced every thing listed above to get rid of the prob.

If Your Going To Hit The Ground Hit It Hard
08-10-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
airborne r/c
Senior Heliman
Location: Fort Rucker, AL

My Posts This: Topic  Forum		Should I have a small amount of oil on my dampers and spindle?

If Your Going To Hit The Ground Hit It Hard
08-10-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
donthomas
Senior Heliman
Location: gibsonville, nc usa

My Posts This: Topic  Forum		Yes, lube the dampers. Dielectric grease works the best.

Don Thomas
08-11-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
airborne r/c
Senior Heliman
Location: Fort Rucker, AL

My Posts This: Topic  Forum		Will that cause a prob tracking and hard shaking in the helio if the spindle is very tight and unable to float back and forth a bit? The spindles were very tight in the dampers until lube was added to the shaft.

If Your Going To Hit The Ground Hit It Hard
08-11-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page628 viewsPOST REPLY
ReadyHeli . Power Helis . CANOMOD

.
.
Gohbee Aviation Stinger 30-90 > flap dampers
 
 
FLYINFOOL
Key Veteran
Location: Cudahy, WI

My Posts This: Topic  Forum		Yes it can.
It will show the same symptoms as a worn out damper since the damper will not be working corectly.


Jeff Borowski
Gohbee Field Rep
08-11-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page628 viewsPOST REPLY
Ron’s HeliProz South . MTA Hobbies . Model Rectifier Corp

.
.
Gohbee Aviation Stinger 30-90 > flap dampers
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 8:51 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF