RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 330 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page1153 viewsPOST REPLY
E-flite . Fast Lad Performance . Ace Hobby

.
.
Gohbee Aviation Stinger 30-90 > GOHBEE STINGER 30??
 
 
DMB9876
Heliman
Location: HASTINGS,MN

My Posts This: Topic  Forum		HEY WHATS UP,,IM NEW TO THE FORUM,,JUST BOUGHT A NEW STINGER 30 YESTERDAY,A BUDDY OF MINE OWNS A HOBBY STORE SO HE GAVE ME A GOOD DEAL ON IT, AND I HAPPENED TO HAVE A OS 32 LAYIN AROUND...DOES ANYONE KNOW IF THATS GONNA BE ENOUGH POWER? ANY TIPS WOULD HELP ALOT THIS IS MY FIRST NITRO, UNTILL NOW IVE BEEN ON A TREX! THANX DAVE
05-15-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
FLYINFOOL
Key Veteran
Location: Cudahy, WI

My Posts This: Topic  Forum		Hey Dave, Welcome aboard.

First, Please turn off the CAPS LOCK.
Caps are considered "yelling" at someone on the forums.

Is your OS32 the heli version or the airplane version?
If it is the heli version it will work great in your Stinger 30.
That is the engine it was originally designed for.
If it is the Airplane version you will have to be very careful to not overheat it. The heli version has a bigger heatsink head for cooling.

The OS32 will be a little short on power for really hard core 3D but will be just fine for light 3D and general aerobatics.
But on the plus side, by running the small engine you will learn to use proper collective management right from the beginning.


Jeff Borowski
Gohbee Field Rep
05-15-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
DMB9876
Heliman
Location: HASTINGS,MN

My Posts This: Topic  Forum		clutch

One more question....can i use the raptor clutch and shaft for my gohbee???
05-22-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
FLYINFOOL
Key Veteran
Location: Cudahy, WI

My Posts This: Topic  Forum		The Raptor V2 and Gohbee clutch and start shaft are interchangeable.


Jeff Borowski
Gohbee Field Rep
05-22-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Eleven_Bravo
Senior Heliman
Location: Modesto,CA

My Posts This: Topic  Forum		Are the mainshafts interchangeable also ??? between Gohbee and Raptor 50

Its not a maneuver until your looking down on it. ~Jason Krause~ Phoenix FF 08
05-27-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page1153 viewsPOST REPLY
Esprit Model . Thunder Power RC . Mikado Modellhubschrauber

.
.
Gohbee Aviation Stinger 30-90 > GOHBEE STINGER 30??
 
 
Gohbee
Senior Heliman
Location: SC

My Posts This: Topic  Forum		Not anymore. Early on we changed our main shaft to have a 4mm cross hole on top instead of a 3mm cross hole. Thus, our head block bolts on with a 4mm bolt as oppossed to a 3mm bolt on the Raptor. Other than that they are the same. I suppose you could drill out your Raptor head block and use Gohbee mainshafts. We've found the 4mm cross bolt to be more reliable than the 3mm bolts.

-David
05-27-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page1153 viewsPOST REPLY
E-flite . Fast Lad Performance . Ace Hobby

.
.
Gohbee Aviation Stinger 30-90 > GOHBEE STINGER 30??
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 8:50 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF