Spitfire1
Key Veteran
Location: Perth Australia
My Posts This: Topic Forum | Im not sure about if this heli would be good for scale anymore, im thinking about the way the lipo pack hangs underneath the undercarriage, also ive managed to eliminate alot of the tail shaking i was haveing by cutting down some tail brace struts of one of my 50 helis and putting them on the voyagerm but its still not completele smooth, and for a scale I think you realy dont want to see any shakeing in the tail. since I last posted im finding the heli to fly quite nicely, very easy to fly just have to be careful not to get to low to the ground as it dont pullup that hard like most helis do .
I think with micro servos and a different lighter lipo pack I would be more happy.
Im interested to know what is the smallest 3s pack you could run and still get at least 4 minutes at least time in the air, it just seems obvious to me that the pack is way to heavy for the heli, unfortunately I cant use any of my 4s packs because its only a jazz 40-6, if I could use say a 3s 2500, then it would be woth while buying some smaller servos and a 2000-2500 lipo, this way when I crash my voyager I could just grab a cheap 450 size and throw in all the same gear(trex or minititan). here in Aus it just takes to long to get hold of JR parts so if it crashes I cant be bothered waiting 3 months for a new spindle , thats how long it took to get a new tail pitch slider, the part cost slightly more than a good cup of coffee but took 3 months to finnally get here!
Thats why I would never buy a JR as good as they are, I dont think you can get parts on the web can you they only use authorised dealers, and here in my city theres only 1. |
