RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 754 ONLINE 76 EVENTS SEARCH REGISTER  START HERE
 
1 page283 viewsPOST REPLY
Heli-Max . Hobby Hut . Heli Wholesaler

.
.
e-E-Flite Blade MSR SR CP CX MCX 400-3D > Blade 400 3D CCPM Question on Blade 400
 
 
10X
Senior Heliman
Location: Salisbury N.C.

I have flipped the grips and washout etc. etc. The problem I'm having is with the CCPM adjustments, when I do stationary back flips or tic tocs the heli is wanting to go hard right, same goes for a standard loop I have to fly left Ail to get through the loop. Does this mean I need to change my ATV's on the Ail to correct this. I have always flown helis with standard pitch control and CCPM is a little different for me.

Thanks
03-07-2008 Over year old.
 
 
tonyn
Senior Heliman
Location: orlando florida

make sure ail righht and left are the same atv and try that as well with elev. hold the sticks left and right while you adjust.
make sure your trims in stunt mode are all the same as in normal mode to.

Flying
03-08-2008 Over year old.
 
 
hotairflyer
Senior Heliman
Location: Northern AZ

I would unplug the motor and run the collective control to its linits both ways and see if the swash stays level. If not then adjust with ATV endpoints. All servos, even the same kind are not always exactly equal.

Lama2,T-rex, Mini Titan, BL-BCPP, B400, PicooZ
03-09-2008 Over year old.
HOMEPAGE  
 
 
jltarter
Heliman
Location: GA, USA

I know that this is a stupid question on my part but what does ATV stand for?

"Insanity: doing the same thing over and over again and expecting different results."
03-09-2008 Over year old.
HOMEPAGE  
 
 
hotairflyer
Senior Heliman
Location: Northern AZ

ATV’s are the electronic adjustment in the TX that control the physical end points of a servo's travel.

Lama2,T-rex, Mini Titan, BL-BCPP, B400, PicooZ
03-09-2008 Over year old.
HOMEPAGE  
 
 
10X
Senior Heliman
Location: Salisbury N.C.

I have been messing with the E flite servos and I got tired of that, so I put in three Hitec 65's and set everything back up. I then used a level on the paddles to adjust the ATV,s and everything looks to be OK at low, mid, and high collective. There is still a little interaction in between those position but nothing to extreme. I flew it today in 15 to 20 mph winds and even with that it seem to handle better than with the E flite servos. Some seem to have good luck with the e flite servos but I never got them to repeat center. The next thing will be to replace the tail servo with something a little better and then I can quit trimming a little left and right. I think the gyro will be OK if it has a good servo to back it up. It seems to perform fairly well in fast BW flight and I don't have to fly it overly hard in a funnel, I guess I'll just have to work the bugs out a little at a time
03-10-2008 Over year old.
 
 
1 page283 viewsPOST REPLY
JR-Spektrum . E-flite . Fast Lad Performance

.
.
e-E-Flite Blade MSR SR CP CX MCX 400-3D > Blade 400 3D CCPM Question on Blade 400
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, March 15 - 3:50 pm - Copyright © 2000 - 2010 runryder.com | email | link to rr | runryder needs cookie