RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 534 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
8 pages [ <<    <     6      7     ( 8 )    >    >> ]10676 viewsPOST REPLY
Midland Helicopters . HeliProz . Ron’s HeliProz South

.
.
Tandem Rotor Helis Vertol Chinook > My new chinook e conversion
 
 
michael f
Heliman
Location: Adelaide - South Australia

My Posts This: Topic  Forum

Richard,
I'm using straight line throttle curve on all my settings, and using throttle hold to start. I don’t have any problems with blades going out of phase, I use the slow start facility and get a really nice slow start up, and it probably takes about 10 to 15 seconds to spool, very realistic.
What version of firmware are you using?

Michael
05-19-2009 07:20 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
avconslt
Senior Heliman
Location: Houston, Texas

My Posts This: Topic  Forum		Michael,

I am not sure what the version of the firmware I have, as I have have not updated it in about a year, so I do not know if there is a more current one or not! But, it is flying so good I hate to mess with it! It probably takes 10 seconds for mine to completely spool up!

Richard

o
05-19-2009 12:40 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
doorman
Elite Veteran
Location: E.Berne, NY

My Posts This: Topic  Forum		Fuselage Is Off!!!

That is about as far as I have gotten...but will check my set up when I get home this week and let you know what I have...
Also hoping to get some trim flights on it now that it is on the new tx and try the cf blades..
Will let you know...
Stan

Team Hirobo/MRC --- RCLIGHTS.NET ----- If there is a cure for this, please don't tell me about
05-19-2009 12:52 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
michael f
Heliman
Location: Adelaide - South Australia

My Posts This: Topic  Forum		Thanks for the replies; Richard, I don’t blame you for not wanting to change anything, why touch it if it’s not broke!!
Stan, looking forward to here the report on the cf blades.

There must be somebody out there that can tell me why I am getting so much difference in head speed between Gov High and Set RPM.
Michael
05-19-2009 02:03 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
michaelf
Heliman
Location: Adelaide, South Australia, Australia

My Posts This: Topic  Forum		Stan, have you had a chance to try those new blades yet?
Michael
06-09-2009 12:38 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
doorman
Elite Veteran
Location: E.Berne, NY

My Posts This: Topic  Forum		NOT YET!!!!!

And I have tried to make time to get to it and just have not yet... I am going to the Mansfield Scale event this weekend and they will be in the van... so HOPEFULLY I will be able to let you know... sorry it has taken me so long, but work just keeps getting in the way and the NATS are VERY close.....

Talk to you soon.... Stan

Team Hirobo/MRC --- RCLIGHTS.NET ----- If there is a cure for this, please don't tell me about
06-11-2009 03:56 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
michael f
Heliman
Location: Adelaide - South Australia

My Posts This: Topic  Forum		Thanks Stan, will look forward to hearing from you.
Michael
06-11-2009 11:05 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
doorman
Elite Veteran
Location: E.Berne, NY

My Posts This: Topic  Forum		Finally !!!!!!!!!!!!!!

I did finally take the time to mark and mount the new cf blades.... and the final note is: THEY WORK GREAT!!!!!!!!!!!!! Sorry I waited so long to give them a try.... even though they are symetrical, the added cord (almost 1/2" wider) took care of any lift that may have been lost...and I did not change my pitch or throttle settings....and no noticable change in run times or temps..
Definetly an upgrade!!!!!!
I would still like to see a set of the Hirobo blades and possibly give them a try too....I will have to look into those a bit later in the season.


Thanks, Stan

Team Hirobo/MRC --- RCLIGHTS.NET ----- If there is a cure for this, please don't tell me about
06-16-2009 01:17 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
8 pages [ <<    <     6      7     ( 8 )    >    >> ]10676 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . ReadyHeli

.
.
Tandem Rotor Helis Vertol Chinook > My new chinook e conversion
 Print TOPIC Advertisers 

Subscribe to This Topic

Saturday, November 21 - 1:09 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF