RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 823 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page1618 viewsPOST REPLY
CANOMOD . Experience RC . Heli-Max

.
.
e-MS Composit Hornet > X3D Tail Rotor Shaft Insertion
 
 
DMShanks
Senior Heliman
Location: Salt Lake City, UT

My Posts This: Topic  Forum		I'm having a bit of trouble driving the tail rotor shaft through the pinion gear and bearing. I've tried twice now and the L0361 bearing, when the shaft insertion is complete, appears damaged. There is severe drag and roughness in the bearing. Quite a bit of force is necessary to get the shaft through the pinion gear. I've tried taping it through with a plastic hammer, and I've used a press tool specially made to drive the Hornet tail rotor shaft. I'm gonna need to order new bearings. When I get one in (and several extras) I'd like to try again. My techniques aren't working. Any suggestions? Thanks.

Dave
02-08-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Micro-Maniac
Elite Veteran
Location: Pasco,Washington Formerly: Captain Chaos

My Posts This: Topic  Forum		I don't think you're damaging the bearing during assembly - I think the shaft and gear is expanding the inner race of the bearing causing the roughness
I think if you remove the bearing you'll find it to be just fine then put it back on it'll feel rough again as it's just the tightness of the fit distorting the bearing

Maybe file the gear down a hair so it's not such a tight fit in the bearing
Then you might need to thin CA or penetrating thread-lock the gear to the shaft to prevent it from slipping in the absence of some of that pressure that helped grip it before
02-08-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
DMShanks
Senior Heliman
Location: Salt Lake City, UT

My Posts This: Topic  Forum		Good thinking...I'll give that a try tonight. I was getting a bit discouraged with the tail assembly. Thanks!

Dave
02-08-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Micro-Maniac
Elite Veteran
Location: Pasco,Washington Formerly: Captain Chaos

My Posts This: Topic  Forum		BTW - It might assemble easier if you press the gear onto the shaft then the bearing onto the gear rather than press the gear and bearing onto the shaft together - But it may not matter after filing the gear down a hair
02-08-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
DMShanks
Senior Heliman
Location: Salt Lake City, UT

My Posts This: Topic  Forum		I'll give 'er a try

Dave
02-09-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page1618 viewsPOST REPLY
Hobby Hut . Heli Wholesaler . JR-Spektrum

.
.
e-MS Composit Hornet > X3D Tail Rotor Shaft Insertion
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 3:18 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF