RunRyder RC Helicopter Topic - The tail of the AVRO

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 842 ONLINE 18 EVENTS SEARCH REGISTER START HERE

1 page

657 views

POST REPLY

Fast Lad Performance	.	Ace Hobby	.	Esprit Model
	.		.

Blitz Helicopters Avro 90 > The tail of the AVRO

AreA51tje
Senior Heliman
Location: Murcia, Spain

My Posts This: Topic Forum

Hi Guys,
Maybe it would be a good idea to set up an topic where we can interchange the configurations for the tail of the AVRO.

I have the GY611 with a Futaba S9256 Digi Tail Servo.

The Avro has a very responsive tail. I have set the travel in the transmitter 100% and will try in flight to increase it to 115% if I feel the need

I also have add a small % of deceleration into the gyro settings. The gain I have to start at 90% like the manual says... will see how it reacts in flight.

Could you tell me your opinions?

Best regards,
Dave

02-01-2008 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE

Climax
Veteran
Location: West London, United Kingdom

My Posts This: Topic Forum

Hi Dave,

I've also got a 611/9256 combination.

I've got the travel set to 100%, as you say the tail is very responsive, even at this setting. I haven't adjusted any of the other parameters as of yet, so far thaey all seem to be fine.

As for the gain, 90% sounds very high... Mine is set to 37%, i.e. as shown on the 611's display. At this setting the tails holds perfectly and I don't get any "hunting" in flight.

Hope this helps?

02-01-2008 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

DWyn
Heliman
Location: FAREHAM, Hants - UK

My Posts This: Topic Forum

Running 611 9256 as well only running 30 gain on mine

02-01-2008 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

Bond007
Veteran
Location: Leicestershire UK

My Posts This: Topic Forum

I have just returned from picking mine up

and had a good chat with Dave, top bloke

He stated the Avro tail is VERY authoritive and NOT to use full travel or it might strip the main gear. Also they found that Radix 105's work the best

HTH

Sean

02-01-2008 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Bond007
Veteran
Location: Leicestershire UK

My Posts This: Topic Forum

I'll be running a CSM 720, Radix 105's and JR8700

02-01-2008 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Droid
Elite Veteran
Location: Deep down in the Southwest- UK

My Posts This: Topic Forum

GY611

Add a little Input Output Delay for LH and RH just for safety.

ID 15 and OD 50 will save unwanted loads on the drivetrain.

02-02-2008 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

trickytiker
Senior Heliman
Location: england

My Posts This: Topic Forum