RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 897 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
5 pages [ <<    <     1      2     ( 3 )     4      5     NEXT    >> ]9377 viewsPOST REPLY
CarbonXtreme . Midland Helicopters . HeliProz

.
.
Scale Model RC Helicopters > Bell Jet Ranger or Long Ranger
 
 
GrantL
Senior Heliman
Location: Springfield, MA

My Posts This: Topic  Forum

Thanks.. I kind of figured that was the case, but just wanted to double check.. No desire to fly her upside down either.

Grant
03-02-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
BarracudaHockey
rrMaster
Location: Orange Park FL

My Posts This: Topic  Forum		Note that my response wasn't specific to your setup, just my experience with scale helis in general.


AMA 77227
http://www.jaxrc.com
03-02-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
GrantL
Senior Heliman
Location: Springfield, MA

My Posts This: Topic  Forum		BarracudaHockey - I understand

What's a rule of thumb on how long the exhaust tubing can be? I know that BarracudaHockey uses exhaust coupling tubing.. I'm planning on using Century's scale muffler and if I exit the exhaust out the back and down, the tubing could be, maybe 6" plus.. What say you guys?
Thanks

Grant
03-03-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Ragged Man
Heliman
Location: Lakewood CO. USA

My Posts This: Topic  Forum		Exaust

Length not a problem height more of an issue if your exit is above pipe outlet could collect liquid and cause motor to load up and run fat. Tube and outlet should be same dia. of pipe exit to not restrict ex flow. Your helis looking great by the way! RAGGED
03-03-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
BarracudaHockey
rrMaster
Location: Orange Park FL

My Posts This: Topic  Forum		I run about 6" or so going uphill.

The thing with mufflers and exhaust extensions is this. You aren't demanding the most power from your setup like the 3d mindset folks so if you loose a bit of power from running a tad richer to compensate for a longer exhaust its no biggie.

Same with using a stock TT muffler or whatever you have that will fit.

That Century scale muffler is hateful on the ears, Emile packs them with steel wool to make them quieter and I believe he has had good success with that approach.

One thing I would reccomend, is a Venom onboard gauge to make sure whatever needle setting you are running isn't burning up the engine.


AMA 77227
http://www.jaxrc.com
03-03-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
GrantL
Senior Heliman
Location: Springfield, MA

My Posts This: Topic  Forum		Thanks Andy.. I've decided not to use the Century Muffler.. Don't know what I'll use yet.. I don't want to have to cut into the side seam of the fuselage but looks like I don't have much choice..

see here.. http://runryder.com/helicopter/t261...highlight=rails

Grant
03-04-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
GrantL
Senior Heliman
Location: Springfield, MA

My Posts This: Topic  Forum		Starting to do the final fitting of the skids.. Moved them back about an inch to place it at the proper placement point..



Grant
03-04-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
mac24
Heliman
Location: Rotterdam - Netherlands

My Posts This: Topic  Forum		NICE!!

I should start building the (FunKey) Long Ranger fuselage I have. The weather is bad overhere, perfect for starting a new project, but I'm too lazy to open the box

Darn, didn't know a heli could make such a big crater
03-05-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
GrantL
Senior Heliman
Location: Springfield, MA

My Posts This: Topic  Forum		Mac24... Go for it.. I think I'm hooked on Scale and haven't even flown it yet. The Fun-Key kit is amazing.. Everything fits perfectly.. Nothing needed rework.

Grant
03-06-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
mac24
Heliman
Location: Rotterdam - Netherlands

My Posts This: Topic  Forum		Grant,

I opened the box last night to show the fuse to a nephew of mine and will start today with a drawing of the fuse and the colors/color scheme I would like to use.

There is a body shop just a block away (where my car will be fixed within 2 weeks), so I'll ask what I will need exactly to paint the fuse or what it would cost to have it painted by them.

Raj

Darn, didn't know a heli could make such a big crater
03-08-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ch47dfe
Heliman
Location: windsor, ct usa

My Posts This: Topic  Forum		Hey guys, I'm new to the forum and I just completed a Funkey long ranger kit for my Hirobo Evo 50 also. Just did the test flight today. It flew great, just needed to do a little trimming with my radio. Got through one tank of gas with no problem. Grantl, I noticed that you had someone make your landing gear for you and I was wondering if you could give me some info on where you got them. Thanks

03-12-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
JestRR
Senior Heliman
Location: Florence, Oregon

My Posts This: Topic  Forum		Those are mine and if you like them i can tell you how to build them or i can do it for ya. Just shoot me a PM!!!!

Grant...Those look great under there!!!

Mike Spinner
Florence OR
NORTHWEST AERIALS/ SCALEWORKS
03-12-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
GrantL
Senior Heliman
Location: Springfield, MA

My Posts This: Topic  Forum		ch47dfe, Have Mike (JestRR) make them for you. He does beautiful work.
Thanks again Mike..

Grant
03-12-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
BarracudaHockey
rrMaster
Location: Orange Park FL

My Posts This: Topic  Forum		Or if you're comfy with a tubing bender and torch make them yourself.


AMA 77227
http://www.jaxrc.com
03-12-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
mbrewer
Heliman
Location: Corpus Christi, TX

My Posts This: Topic  Forum		anybody have drawings,dimensions for the low skids?

"I'd give ya my 2 cents, but I just spent it on my heli"
03-12-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
BarracudaHockey
rrMaster
Location: Orange Park FL

My Posts This: Topic  Forum		http://www.gatewayrc.org/jet_ranger.pdf has the factory drawings, you can make some measurements from there.


AMA 77227
http://www.jaxrc.com
03-12-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
GrantL
Senior Heliman
Location: Springfield, MA

My Posts This: Topic  Forum		Fuel Proofing

Tonight I fuel proofed the inside of the fuselage.. I used the recommended Z-Poxy Finishing Resin. That stuff is awesome.. Easy to mix..equal parts, workable for 30 mins, dries to a nice smooth finish.. Just thought I'd share for those who have inquired about the fuel proofing methods..

Grant
03-26-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
GrantL
Senior Heliman
Location: Springfield, MA

My Posts This: Topic  Forum		Well... Here are my LR mechanics ready for this weekends test flight. Blue dampeners, Black paddles, SAB 620 blades.. Wish us well.



Grant
04-04-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
mac24
Heliman
Location: Rotterdam - Netherlands

My Posts This: Topic  Forum		Good luck!

Too bad I haven't started my new project yet. My schedule has been quite hectic lately. In fact I haven't even flown in months. Bad weather over here.

BTW, have you decided which muffler you're going to use?

Raj

Darn, didn't know a heli could make such a big crater
04-04-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
GrantL
Senior Heliman
Location: Springfield, MA

My Posts This: Topic  Forum		Raj

Yes.. I'm going to use the Maverick muffler (the one pictured).. I was going to use Century's Scale muffler but didn't hear anything good about it.. It apparently is noisy. If the Wx cooperates, Sunday will be my first season flight.. And test flights at that..

Grant
04-04-2008 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
5 pages [ <<    <     1      2     ( 3 )     4      5     NEXT    >> ]9377 viewsPOST REPLY
Ron’s HeliProz South . MTA Hobbies . Model Rectifier Corp

.
.
Scale Model RC Helicopters > Bell Jet Ranger or Long Ranger
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 7:08 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF