Heliman - Location: Piura-Peru - My Posts This: TopicForum
Yea sure,,,thanks,,,will try first with the pipe, will tell you how,s he goes,,,tell me your pitch,,,how much pos and neg,,,,I use the stock wooden blades,,,,
The numbers of take off,s should be the same as the landings
I dont know anything about nitro's just got my raptor 30 but I have an OS32 with tuned pipe. And it is just as powerful if not more on climbouts as my stock TREX450SEV1. Its no 3D machine but there is no problems at all as far as power or stability. And it blows my mind flying for 15 or 20min. on a tank.
Canton MO backyard flying club Club President Team No funds left.
I run around +11 and -11 with inexpensive Maverikk carbon blades. The OS37 is a great little power house!
tryan02,
I had an OS32 in my Raptor 30 before I went with the OS37. With 15% nitro and 1700rpm or so on the head I got near 30 minute run times. Those times have been cut in half with the OS37, but the power difference between the two is night and day.
Carbon blades 550?,,mmm ok,,u win My next change will be a brand new os37 motor and those mav carb blades,,,,need to upgrade anything else? my rappy 30 is v1 version....don't want to spent to much cause Im practicing 3d with my 50.and it will need some crash kits in the next weeks hehehe,,,,,
The numbers of take off,s should be the same as the landings
where ya buying the carbon blades? Or do you know of a better wooden set? I glued the clamps on and cut the covering underneath as per directions I can see it is already coming loose.
Canton MO backyard flying club Club President Team No funds left.
