bstock
Key Veteran
Location: Easton, MD.
My Posts This: Topic Forum | No Problem.
Phil has the design layered... so it should only be 15 min or so for him to get one up with "Heli" on the outside, for you to look at.
I will get with him in the morning on this... and get it up for comparison.
If you decide to use one of Phil's... we will get to you a camera ready hi resolution copy of it in black and white... and in color - so you can use it for teeshirts, the website, cards, etc.
Brent
edit - I didn't see the part about the 600 canopy until after I posted.
I can talk to him about that also. Bill also mentioned it in a PM to me.
that would be more than 15 mins for him to do.
When I asked Phil to do this... I gave him some photos of a synergy, an aurora, a raptor, and a 600n... so he knew what these things looked like.
I told Bill that in knowing Phil... he choose the raptor because it had the bulge in the canopy side... and that let him vectorize the photo and then have more curves to work with... in order that he could create more of that look of 3D / depth in the graphic.
I asked Phil on this after PMing Bill that info... and I was right... this is why he choose the raptor canopy.
He would most likely be cool in changing it out... but it would result in not having quite the 3 dimensional look as this one... because of the smoother sides on the 600...
so basically... it would not quite stand out as good on a flat surface... like a teeshirt.
Just let me know what your thoughts are on this... and if you want too... I will get him to use a 600 in it.
thanks - Brent |
That has got to be alot of work though.
