RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 468 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
7 pages [ <<    <     5      6     ( 7 )    >    >> ]21449 viewsPOST REPLY
Experience RC . Heli-Max . Hobby Hut

.
.
e-JR Parkmite Voyager-E > Super Voyager E
 
 
Rotodingo
Heliman
Location: Garches, France

My Posts This: Topic  Forum

Hello MICHELIN

About the carbon battery plate: is the ref number you gave us including the metal parts and screws to bolt it to the main frame?

Thanks
03-10-2009 08:07 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
michelin
Senior Heliman
Location: Austria

My Posts This: Topic  Forum		Hi,

not received the parts yet, but i think its is only the plate.
PS: i am using the cross members from K&S.

Cheers
Michael

Never touch a running system
Sylphide 90 Vibe 50 Vibe 500e Parkmite
03-10-2009 05:02 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Akira
Senior Heliman
Location: Osaka-Japan

My Posts This: Topic  Forum		The CF battery plate comes with the metal parts and the bolts. So no need to worry about those. In fact, they are nothing but the metal landing skid mounting blocks.

JR SVE 6cell
MSH Protos
03-10-2009 09:19 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
vpersiani
Heliman
Location: Creteil, France

My Posts This: Topic  Forum		conversion kit SV4 to SVE6 now released for sale according to JR website

ref 61369
Price 42000 JPY

Content:
CNC Main gear
Auto rotation housing
HG Bearing case
HG tail pipe holder
Frame brdige (at bottom of motor based on pictures)
HG cross members
Pinion T12 T14 T17
Carbon battery mount
Stabilizer bar L340
Brushless Motor NHM-40-16BL（1,050rpm/V）
ESC is not included since 4S version is OK up to 6S


Honnestly, that sounds quite expensive to me.
Most parts are probably same as the existing K&S options.
Only the motor and "frame brdiges" are really specific / new.
03-12-2009 02:47 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Rotodingo
Heliman
Location: Garches, France

My Posts This: Topic  Forum		And battery plate! I received a scan of the SVE 6S main exploded views and parts list from RC Champ. I can give you some ref number if needed. Main gear is different from the K&S one. Probbaly a little cheaper to produce. The K&S main gear is really beautiful but use the same one-way bearing as the VE/SVE 3-4S kits. Looks like the one from the SVE6S is stronger.

Nicolas
03-18-2009 06:25 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
michelin
Senior Heliman
Location: Austria

My Posts This: Topic  Forum		Hi,

can you post the part number for the new stabilizer bar.
or do you have a download link for the exploded views.

Thxs
Michael

Never touch a running system
Sylphide 90 Vibe 50 Vibe 500e Parkmite
03-20-2009 06:50 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Akira
Senior Heliman
Location: Osaka-Japan

My Posts This: Topic  Forum		Hi,

The part number of the longer (440mm) stabilizer bar is JR83057.

Main rotor grips are also updated, but not included in the conversion kit, with longer linkage balls just like those used on T-REX 500's and others.

Akira

JR SVE 6cell
MSH Protos
03-22-2009 04:35 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
michelin
Senior Heliman
Location: Austria

My Posts This: Topic  Forum		Hi Akira!

thank you, can you post the main grips part number too,
or do you have a chance to post the sv6 views including part numbers

Greetz
Michael

Never touch a running system
Sylphide 90 Vibe 50 Vibe 500e Parkmite
03-22-2009 08:01 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Akira
Senior Heliman
Location: Osaka-Japan

My Posts This: Topic  Forum		Michael,

I just took a glance at the grip at a LHS and didn't check
its part number, but my guess is that the newer grip shares the same part number as the older one because they are just a replacement, not a 6S version specific part.

Akira

JR SVE 6cell
MSH Protos
03-22-2009 08:41 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Rotodingo
Heliman
Location: Garches, France

My Posts This: Topic  Forum		Correct. First version was with a 2mm screw holding the ball and a conical aluminum part on the grip (2mm thread then). Last October i received a SVE4S that already had the new blade grips with one piece ball linkage using 3mm thread. My guess is the older version would break too easely in a crash. With high probability for the screw to break inside the grip making it good for garbage. You may order only the new ball linkage, enlarge the hole in the blade grip using a reamer (small job to do) and then make the new 3mm thread.
03-25-2009 11:03 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
vpersiani
Heliman
Location: Creteil, France

My Posts This: Topic  Forum		SVE now available at ready heli!

http://www.readyheli.com/JRP9540_Vi...E_p/jrp9540.htm
04-02-2009 10:26 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
fuhlemann
Senior Heliman
Location: Jackson, MI

My Posts This: Topic  Forum		hey guys

since i've lost my protos yesterday, i'm trying to find a good replacement.

If i'll go back to electrics, i would like to use the following stuff...

I got a yge60 brushless esc and would like to use a 6s1p a123 2300mAh pack.

what RPM could I use on the SVE 3S as maximum? can't really find out what's better.

as a motor, i would like to get a specially made strecker brushless with the correct rpm/V. looking at a max power of about 900W-950W continious. poor batteries, but they'll make it :-)

so guys, what head speed should i'll be pointing at? I'd use 430mm radix blades and 72mm radix on the tail. doing very light 3d, more basic acrobatics like rolls, loops, inverted, etc.

thanks
florian

MSH Protos 6S
Next-D Rave 450 4S
Spektrum DX7 SE w/AR7600
04-10-2009 01:40 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
Rotodingo
Heliman
Location: Garches, France

My Posts This: Topic  Forum		I never flown the SVE3S but the old Voyager E sharing the same rotors (with a few mods on the SVE) and the SVE4S.

Honestly i think 2000rpm is a maximum on the plastic rotorhead. 1800-1900 is what you should haim at.

NIcolas
04-12-2009 07:36 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
fuhlemann
Senior Heliman
Location: Jackson, MI

My Posts This: Topic  Forum		what's maximum on the sve4 rotorhead?

MSH Protos 6S
Next-D Rave 450 4S
Spektrum DX7 SE w/AR7600
04-12-2009 07:41 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
Rotodingo
Heliman
Location: Garches, France

My Posts This: Topic  Forum		SVE4S, SVE6S and Vibe 500E share the same head. I use 2800 rpm without any problem. 15 months of flights. No wear except 2 ball link i will need to change soon. So 3000rpm is probably easy to get without troubles.

Nicolas
04-17-2009 10:03 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
michelin
Senior Heliman
Location: Austria

My Posts This: Topic  Forum		can anyone post the JR part number of the NHM-40-16BL.
Cheers
Michael

Never touch a running system
Sylphide 90 Vibe 50 Vibe 500e Parkmite
04-30-2009 06:31 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
vpersiani
Heliman
Location: Creteil, France

My Posts This: Topic  Forum		Complete part list

Look here!

https://www.rcjapan.org/JR_Super_Voyager_E.html
05-03-2009 09:46 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
michelin
Senior Heliman
Location: Austria

My Posts This: Topic  Forum		Great! Thank you!

Never touch a running system
Sylphide 90 Vibe 50 Vibe 500e Parkmite
05-04-2009 05:48 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
7 pages [ <<    <     5      6     ( 7 )    >    >> ]21449 viewsPOST REPLY
Heli Wholesaler . JR-Spektrum . E-flite

.
.
e-JR Parkmite Voyager-E > Super Voyager E
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 8 - 6:41 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF