RunRyder RC Helicopter Topic - OS hyper 50 in a Century 109A

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 855 ONLINE 79 EVENTS SEARCH REGISTER START HERE

1 page

189 views

POST REPLY

Ace Hobby	.	Thunder Power RC	.	Mikado Modellhubschrauber
	.		.

Scale Model RC Helicopters > OS hyper 50 in a Century 109A

flymedic
Heliman
Location: Wadena, MN - US

My Posts This: Topic Forum

I put a OS hyper 50 in the mechanics of a 30 - 50 size Century Agusta 109a and the fan shroud is in contact with the top of the engine head because the head is so long. Do I need to trim this part of the shroud so it is not in contact with the head? Since it is plastic I suspect it will melt. It was very hard just getting the shroud in place with this engine. P

02-27-2007 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

the Wasp
rrProfessor
Location: Vt

My Posts This: Topic Forum

(Century mechanics) yes we guys with our pod & boom cut the shroud to fit around the Hyper's head, in the end after your done cutting the top fin on the head should be right inline with the shroud, if you take your time cutting you can get a rather nice fit with the shroud formed tight around the top fin, and being scale with the enclosed fuse run your motor 1 or 2 clicks rich, your motor should run quite cool..

Jim

Jim
Buzz Buzz Buzz

02-27-2007 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

flymedic
Heliman
Location: Wadena, MN - US

My Posts This: Topic Forum

Thanks, I sort of figured I needed to trim that thing but wasn't sure. I appreciate the comment on running a couple clicks richer as well since this is my first scale model.
Gary

02-27-2007 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

1 page

189 views

POST REPLY

Futaba-RC	.	Boca Bearings	.	XHELI.COM
	.		.

Scale Model RC Helicopters > OS hyper 50 in a Century 109A

Print TOPIC

Advertisers

Subscribe to This Topic