From the creators of MultiGov, the first dual-mode nitro helicopter governor, we are proud to announce the world’s first dedicated dynamic electric helicopter governor “eMultiGov”. eMultiGov maximizes your electric RC helicopter’s 3D performance by giving you more power when you need it while keeping the rotor speed constant at other times. eMultiGov achieves this by monitoring the helicopter rotor speed and automatically adjusting the input to your motor’s electronic speed controller (ESC).

eMultiGov has been tested to work with and enhance Align’s stock T-Rex 600 helicopter, 600X/XL motor, and Align’s BL ESC. If you can install the RPM sensor correctly, eMultiGov should work with other electric helicopters and ESCs.

eMultiGov Features
-------------------------------
• Push 3D performance to the limits by giving you more power when you need it while keeping the rotor speed constant at other times
• Get consistent flight feel from start to finish; unlike some ESC governors, RPM does not drop as battery voltage drops (as long battery can provide enough power)
• Replaces and can produce better 3D performance compared with ESC governors. Gives you dynamic governing with low-cost, high current airplane ESCs
• Easy installation and upgrade to stock T-Rex 600
• Eliminates guesswork in setting up target RPM; unlike ESC governors, no optical tachometer/tweaking needed
• Maximum RPM reached during flight viewable after flight
• Fast, dedicated microprocessor controls actual rotor speed – not just motor speed which may differ from rotor speed due to one-way bearings
• Three individual remotely selectable speed and low throttle point settings
• Detachable backlit LCD makes setup fast and easy
• Only one LCD configuration module is needed for any number of eMultiGov or MultiGov (nitro governor) units
• Built-in adjustable slow startup and throttle failsafe
• Small and light board adds almost no weight to model
• Works with Futaba, JR, and Spektrum receivers
• Software can be upgraded for future enhancements. eMultiGov can be sent to Aerospire and converted to nitro helicopter MultiGov without any hardware changes
• Designed and developed in the USA

To obtain customer feedback, we are only selling 30 units in this limited release. If you are a hardcore 3D pilot who demands the best or sport pilot looking for an easy-to-use electric governor, we encourage you to try eMultiGov.

You can watch T-Rex 600 test flight videos here:

http://www.tuks.ch/video/eMultiGov_Lukas_Riva.wmv
http://www.aerospire.com/videos/eMu...hilip_Cadiz.wmv
http://www.aerospire.com/videos/eMu...ndon_Updike.wmv

Adobe PDF product manual is here:

http://www.aerospire.com/docs/emultigov_manual.zip

Example installations on T-Rex 600:

We will be at the Las Vegas Fun Fly next week (Feb. 9-11) and will have some units for you to try out. Pilots flying with eMultiGov on their T-Rex 600s in Vegas are Lukas Riva, Philip Cadiz, Brandon Updike, and Mike Wilson.

eMultiGov with detachable backlit configuration LCD is $95 USD. If you already have MultiGov or have access to an Aerospire LCD, you can purchase eMultiGov without LCD for $70 USD. To order eMultiGov in this limited release, go to http://www.aerospire.com

Bob Li
Aerospire LLC

Hey I will be in Vegas I would like to see how these work
Sound pretty interesting
David

Ok so I watched a couple of videos and I am sold I just ordered one
David

You wont be disappointed. I've been using the eMultigov on my T-Rex 600 for a few months now and I am happy with the performance and cosistancy of the headspeed.

....Mike

Teambob00

I just installed an Eagle Tree data recorder on my Raptor E620. Is the eMulitGov compatible with Eagle Tree Sensors?

.

... BTS

I just installed an Eagle Tree data recorder on my Raptor E620. Is the eMulitGov compatible with Eagle Tree Sensors?

No. We make it a big point in the manual saying not to plug any data logger sensor into eMultiGov or vice versa. The reason for this is because Eagle Tree sensor's wiring is different so they are incompatible and will cause damage if you try.

bob