Cryofix
Heliman
Location: Easton PA
My Posts This: Topic Forum | Lowflyer,
as far as hard 3d I can not honestly say, I can not do that yet, I can however verify 2200 head speed with a 20 tooth pinion, I can verify I hear no bogging on +12 -11 pitch pumps, and no problems with very fast climb outs.
If you have a Nicad charger you can use this [url=http://slkelectronics.com/lipodapter/index.htm]
this will allow you to use any charger that can do Nicads, and think the triton will charge up to 5 amp.
The factory A123 OEM charger will only do up to 4s from what I have read.
The 1010c is also coming out with a new firmware upgrade in a few days that will allow you to select A123 cells and charge them, as per charlie Wang in a RCgroups thread.
Here is what I suggest, Get a 1010C or Astro 109, spend alot of money on a good ac to dc power supply becasue the PC power supply I have can not handle the juice needed to charge these, I can only hit 3.6 amp safely without the PS shutting down, or hook to a car battery.
Search Ebay for the "Iota 55" its a HAM radio power supply with plenty of juice. I was told this will do 2 1010C charging 10S lipos at 1C with ease. Not sure but it should be able to handle 2 1010C maxed at 5.5 amps each
hope this helps. |
-.jpg)
, but i am talking about the OEM factory 36v blance charger for A123 cell,,
