RunRyder RC Helicopter Topic - change EXII to a 3D heli

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 739 ONLINE 81 EVENTS SEARCH REGISTER START HERE

1 page

307 views

POST REPLY

MTA Hobbies	.	Model Rectifier Corp	.	EDGE Rotorblades
	.		.

HIROBO Turbulence - SDX - Freya - Sceadu > change EXII to a 3D heli

0fer
Heliman
Location: israel

hi

i have a freya EXII which i want to convert to a 3D heli

what do i need to do?

thanks

09-14-2006 Over year old.

mrNoodles
rrProfessor
Location: Borlänge, Sweden

Put on some harder dampers, maybe the Hirobo 80´s.
Adjust the collectivesetup so you have a +/-10* curve.
Maybe change to a higher gearratio, 8.45 is common for YS91 and seems to work fine for SZ-H´s as well.

What engine, muffler, gearratio and electronics do you have in your sweet EXII right now?

/Fredrik
'Hm now I just have to find out where to connect the GV1 sensor to the Jazz80 ESC.

09-14-2006 Over year old.

HOMEPAGE

0fer
Heliman
Location: israel

mrnoodles thanks

servo 9252 all around
engine os 91c-spec ps
gyro 601
muffler MP II

do you recommend to change the head and put a SSZ-III head ?

09-14-2006 Over year old.

mrNoodles
rrProfessor
Location: Borlänge, Sweden

Not sure how the SSR-VII works for 3D.

/Fredrik
'Hm now I just have to find out where to connect the GV1 sensor to the Jazz80 ESC.

09-14-2006 Over year old.

HOMEPAGE

pwood
Key Veteran
Location: Dubai - United Arab Emirates

Hi

I have 2 x EX2's and an Evo90 and the tech differences are:
gear ratio, head, tail gear ratio and lots of metal / carbon bits on the ex2's

Paul

09-14-2006 Over year old.

CT.Chopper
Veteran
Location: Meriden, CT

I would go with the EVO .90 head,
with the correct gearing for your motor/ pipe.

I was thinking of doing that with mine but, the cost of a crash would hurt too much.

i'd rather crash a plastic heli..

Rob Landry.

09-15-2006 Over year old.

0fer
Heliman
Location: israel

hi Rob

you are right. i suppose i leave it like this

09-15-2006 Over year old.

pwood
Key Veteran
Location: Dubai - United Arab Emirates

Hi guys

I have seen a guy 3D a Super 2, which is a plastic framed Freya with an EX2 / E3 ssr7 metal head, and it was wild enough...

He had 3D blades and the weights out of the paddles and the flybar ratio set to the "more aggresive" setting...

With the price of an EX2, you could consider selling it and buying a plastic Evo90

Have fun

Paul

09-15-2006 Over year old.

iyoy
Senior Heliman
Location: Bacolod City, Philippines

I've flown a friend's EXII with the SSZ-III head and the SWM (eCCPM) conversion and the FRP blades from an EVO90. It is a very capable 3D setup. It is essentially a Freya Evo90 OP SWM with a carbon frame.

I agree with Paul though. For the money, best to just get an Evo90. I have 2 EX2's with SSZ-III head myself that I use for F3C competition and have put out an order for a Freya Evo90 SWM to use for 3D.

iyoy

09-16-2006 Over year old.

0fer
Heliman
Location: israel

thanks guys

Perhaps I will sell it and that's it

09-17-2006 Over year old.

1 page

307 views

POST REPLY

ReadyHeli	.	Power Helis	.	CANOMOD
	.		.

HIROBO Turbulence - SDX - Freya - Sceadu > change EXII to a 3D heli

Print TOPIC

Advertisers

Subscribe to This Topic