RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 403 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
16 pages [ <<    <     1      2     ( 3 )     4      5     NEXT    >> ]29711 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
e-Zoom, Shogun, Dolphin > Shogun Midget
 
 
lightningrc
Elite Veteran
Location: UK

My Posts This: Topic  Forum

ATLAST !! just soldered up a 11.1 lipo out of the two 7.4v ones which came with it and also added a 3 cell balance lead to charge it properaly.

Sorted !!!!! It went straight into a hover in my front room , needs to be set up now out side
11-26-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
robl45
Key Veteran
Location: Deerfield Beach, FL

My Posts This: Topic  Forum
are you guys flying with 2 cell or 3 cell power?

I was going to get the rc-expert kit but wasn't sure about the power of the motor he is providing. How big is the pinion he provided? The 9g servos are kinda big for the heli but at least they are decent servos.

I'm planning I think to fly 2 cell when I get it unless its not enough to do loops and such. 2 cell is cheaper for buying batteries.
11-28-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
lightningrc
Elite Veteran
Location: UK

My Posts This: Topic  Forum
Take it from me , it will not even lift off the floor with 2 cell , with all the big servo's fitted , large gyro , esc and your rx its not far off the weight of a Trex.
I flew mine last night , but stripped a main gear as al the main frame screws were not loctitied from new
11-28-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
robl45
Key Veteran
Location: Deerfield Beach, FL

My Posts This: Topic  Forum
well thats because you got the rcexpert kit. Rc expert is known to put in crappy motors and crappy batteries. The 2s he provides is probably the problem and the motor probably isn't up to par either.
11-28-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
lightningrc
Elite Veteran
Location: UK

My Posts This: Topic  Forum
To be fair the spec on the motor and batteries were good , which I posted earlier.

Have you flown the pro version with 2 cells ???
11-28-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
lightningrc
Elite Veteran
Location: UK

My Posts This: Topic  Forum
EP100 Pro / Pixy Zap CNC Micro Helicopter 1
RC-expert Brushless Motor 3200KV (20-40) 1
7.4V Lithium Battery Charger 1
Futaba 6EXH 72mhz 1
7.4V 850mAh Lithium Battery 2
30A Brushless Motors Electronic Speed Controller (ESC-BS30A) 1
RC-expert 9g Servo 4
Aluminium Case 1
11-28-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
HELILAB
Senior Heliman
Location: Sunny Miami, Florida 33016

My Posts This: Topic  Forum
lightningrc

how much your heli weight, it should be less than 180 grams ready to fly. My weight 175grams ready to fly Im using a 4800kv motor on 2 cells and I have power to do mild 3D rolls, loops and inverted flying



Mario
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
bulldogs
Elite Veteran
Location: ~OC~ ,CA USA

My Posts This: Topic  Forum
what about the pixy pro with all CF and metal head ????

~TEAM OCHC~
A strong man stands up for himself a STRONGER man will stand up for others.
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
HELILAB
Senior Heliman
Location: Sunny Miami, Florida 33016

My Posts This: Topic  Forum
what about the pixy pro with all CF and metal head ????

I think the pro version is heavier, I bought the carbon fibre boom and is heavier than the stock one, the carbon fins are also heavier than plastic, you really dont need all the metal and carbon upgrades just the swash plate, the plastic swash came apart in flight

here is my fleet



Mario
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
bulldogs
Elite Veteran
Location: ~OC~ ,CA USA

My Posts This: Topic  Forum
nice thanks .....cool pics

~TEAM OCHC~
A strong man stands up for himself a STRONGER man will stand up for others.
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
lightningrc
Elite Veteran
Location: UK

My Posts This: Topic  Forum
HELILAB yours is not the pro , so yours will only use the tiny servo's also.
Dont know the weight but its heavy with the standard micro servo's
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
gorn
Elite Veteran
Location: Western Australia

My Posts This: Topic  Forum
Does the Pro use regular sized servo's?
Sorry, havent been keeping up with this

If you bling it, they will come :D
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
lightningrc
Elite Veteran
Location: UK

My Posts This: Topic  Forum
The pro will fit the standard size micro servo's as fitted in the Trex etc but there on the limit fitting them in , would have been better to fit the little tiny servos like fitted in the Walkera 52 but this was what were supplied.
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
caseyjholmes
Elite Veteran
Location: SoCal

My Posts This: Topic  Forum
so how is the stock $99 version of this tiny heli flying? Anyone have one doing 3D indoors yet? Thats cheap enough to buy two. One for flying and one to rob for crash parts

Every detail counts!
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
lightningrc
Elite Veteran
Location: UK

My Posts This: Topic  Forum
Yes from what ive seen I would now have bought the cheaper version as its tried and tested , seems like they leave all the testing to us on these cheap heli's
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
bulldogs
Elite Veteran
Location: ~OC~ ,CA USA

My Posts This: Topic  Forum
Casey i may hafto get one also !!! Looks KOOL

~TEAM OCHC~
A strong man stands up for himself a STRONGER man will stand up for others.
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
caseyjholmes
Elite Veteran
Location: SoCal

My Posts This: Topic  Forum
Lets do it Buddy! I'll get one for sure eventually. I tried to do this with a hornet years ago. Made it all short and stubby. It really flew too! When I Went to flip it in my lviing room, I crashed the hell out of it though, and it was all custom, so I didn't feel like making another one

this looks like the easier alternative. I think I'll go cheapo on this project and get the $99 version from Fung at flying-hobby.com. That way I can get two of them, and use one as a crash parts box. I think I have enough airplane electronics laying around to fly it. Just need the heli and a bl motor for it.

Every detail counts!
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
caseyjholmes
Elite Veteran
Location: SoCal

My Posts This: Topic  Forum
Dang! It flies for 5 minutes too!
http://www.infinity-hobby.com/main/...0/Produce_5.wmv

Wonder how well it flies on the stock motor?
I have batteries that weigh/cost more than this thing. I'll pick one up for sure

Every detail counts!
11-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
robl45
Key Veteran
Location: Deerfield Beach, FL

My Posts This: Topic  Forum
you should get the pro version, I'm going to get one in the next week or so, many more servo choices. You want to be stuck using the pino servos that aren't available in the US?
11-30-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
petesavva
Heliman
Location: Camberley UK

My Posts This: Topic  Forum
pro

hey guys if anyone of you is looking for a pro states side, i have one listed here on RR
11-30-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
16 pages [ <<    <     1      2     ( 3 )     4      5     NEXT    >> ]29711 viewsPOST REPLY
Midland Helicopters . HeliProz . Ron’s HeliProz South

.
.
e-Zoom, Shogun, Dolphin > Shogun Midget
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 9:03 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF