JEraptor Senior Heliman Location: Kankakee IL
My Posts This: Topic Forum | NO NO NOI used the 8700G with a GY401 for a very short time and it did work ok but there was a problem that made me decide it was a bad idea.
First off, I was told that if the combo is powered up even for a second with the gyro set for Digital servo that the servo will burn up instantly.
The problem I experienced was that when the combo was powered up and the gyro was initializing, it would throw the servo hard to one side overdriving it badly regardless of the travel limit. After the gyro initialized, it would work ok. It seemed to me that this would not be good on the servo to be stalled for a full second whenever powered up.
I did NOT have the gyro set for a digital servo. |