RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 874 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page2173 viewsPOST REPLY
Heli-Max . Hobby Hut . Heli Wholesaler

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > Sceadu 50 upgrades
 
 
cebc7
Senior Heliman
Location: Panamá, Rep. de Panamá

My Posts This: Topic  Forum		Hello guys would you please advice Part Numbers for sceadu 50 cnc tail blade holder (0412-149) and cnc wash-out block set (0414-112).

thanks
06-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
chopperman1
Key Veteran
Location: Carle Place, New York

My Posts This: Topic  Forum		Im looking for the wasout block also, someone resond please!
06-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Yugdab
Senior Heliman
Location: Bedfordshire, England

My Posts This: Topic  Forum		Do you mean the radius block, the part used to set the phase that has the two pins pointing downward? If so it is 0403-216.

If things don't change... they'll stay as they are!
06-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
dgshaffer
Elite Veteran
Location: New Jersey

My Posts This: Topic  Forum		The washout can be found here:

(0412-188) SD-G Wash Out Set (10mm)

I wasn't even aware that there were CNC tail blade holders. I can't even imagine why anyone would want them other than pure bling.
06-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
marc8090
Key Veteran
Location: Long Island, N.Y.

My Posts This: Topic  Forum		The radius block and washout base are the ones from the X-spec. I think they're 0404-730 and 0404-731. I am not aware of anybody making aluminum tail blade grips.
06-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
cebc7
Senior Heliman
Location: Panamá, Rep. de Panamá

My Posts This: Topic  Forum		Mine just got broke. I was using 97mm tail blades and the blade holders just blow off the heli. Fortunatelly nothing else happened to the heli. The only thing I can imagine is that they were cracked before the accident.

06-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Learn to Fly
Key Veteran
Location: Yalesville Connecticut

My Posts This: Topic  Forum		The only part I do not like on the EVO 50 is the tail grips. I know do a search, which I did and everyone says its ok. But I still do not like the sloppyness. So I am seeking out tail grips.

Jeff


Jeff
Believe nothing you hear, and half of what you see...
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Leif
Elite Veteran
Location: Oxford, PA - USA

My Posts This: Topic  Forum		Jeff,

You can do the upgrade to the Freya hub and grips. Here's the parts list:

0414-164 Tail Rotor Hub
0404-662 Tail Grips
2500-070 3x9x3 Bearings
2532-028 M2x8 Screws

You will re-use the existing radial and thrust bearings from the Evo grips for the Freya grips. The conversion adds a second radial bearing. The screws are optional, since you can also re-use the existing screws for the new grips.

This conversion adds 17mm (bolt-to-bolt) to the diameter of the tail. Because of this, I wouldn't recommend trying blades longer than 95mm with the Freya conversion.

Leif
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
SubSailor
Veteran
Location: Austin, TX.

My Posts This: Topic  Forum		Jeff,
TDR makes them and Heliproz carries them but they are out of stock right now. Anyway, here's a link:

http://www4.mailordercentral.com/he...p?number=825260

Hope it helps.
John

Fromeco Field Rep.
A day without sunshine is, well.., alot like night time.
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Learn to Fly
Key Veteran
Location: Yalesville Connecticut

My Posts This: Topic  Forum		Do any of you think the Quick UK, Raptor...sorry, grips would do the trick?

50$ and they BLING!!!

Jeff


Jeff
Believe nothing you hear, and half of what you see...
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
cebc7
Senior Heliman
Location: Panamá, Rep. de Panamá

My Posts This: Topic  Forum
Quote 
Do you mean the radius block, the part used to set the phase that has the two pins pointing downward? If so it is 0403-216.


Does this part fits into the plastic part with the 2 holes where 2 pins get in. They must be perfectly fitted into each other.
06-13-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
AirFlex
Senior Heliman
Location: Woodbury, CT

My Posts This: Topic  Forum		The metal radius block (the one with the 2 pins) # 0404-730 fits just fine in the stock washout base. I just put mine in.
06-13-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
AirFlex
Senior Heliman
Location: Woodbury, CT

My Posts This: Topic  Forum		How many have done this upgrade to Freya tail hub and grips?
06-24-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page2173 viewsPOST REPLY
JR-Spektrum . E-flite . Fast Lad Performance

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > Sceadu 50 upgrades
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 12:40 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF