RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 790 ONLINE 80 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <     1     ( 2 )    >    >> ]2587 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . EDGE Rotorblades

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > Buying a Hirobo 90 Evo or X Spec?????????
 
 
epc2
Senior Heliman
Location: Miami , Fl./S.Domingo.

My Posts This: Topic  Forum

3dJedi:I'm not into micros , read my first post and you'll understand why I want a nitro Heli.

ErichF:thanks for the info.

epc2.
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
THX1138
Elite Veteran
Location: Plainfield, IN

My Posts This: Topic  Forum
ErichF

What head speed are you running with the 7.91?

Lou

Eigenharp enthusiast.
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ErichF
Elite Veteran
Location: Odessa, FL 33556 (Tampa Area)

My Posts This: Topic  Forum
1850 upstairs 1550 hover
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
THX1138
Elite Veteran
Location: Plainfield, IN

My Posts This: Topic  Forum
No issues you say? I know you have have a lot of success with your X-spec recently so I guess you would know. Are you flying any 3D on this set-up? What muffler are you running?

Lou

Eigenharp enthusiast.
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ErichF
Elite Veteran
Location: Odessa, FL 33556 (Tampa Area)

My Posts This: Topic  Forum
I did some 3D with it before I put on the SSZ-III head, and it pulled through what I could do just fine. I'm no hard core 3D nut tho

I would like to switch this thing over to 3D ratios after the Nats and see how she really does with that style of flying under the Evo head.

I'm using that $80 Century Quiet Tune 90 Muffler. It's a Hatori product distributed by Century. It's funny as it's rather unique and draws the question a lot. At a recent contest Cliff Hiatt and Wayne Mann asked WTF it was.



It uses no rear bracket or stays, and has a Curtis MPII style angled header. Plus the whole thing is nicely polished.

BTW, I have a buddy here that flies the low ratios on his YSs in all his Robbes. They are the smoothest machines at the field, and have no problems getting with the program. Tic Tocs, Piro-Flips, you name it. He uses the SB18 on those.
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
mrNoodles
rrProfessor
Location: Borlänge, Sweden

My Posts This: Topic  Forum
8.45 is recommended for 3D
7.92 is better suited for smooth 3D/FAI
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
3dJedi
Senior Heliman
Location: KCMO. USA

My Posts This: Topic  Forum
where can you get an x-spec?
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
epc2
Senior Heliman
Location: Miami , Fl./S.Domingo.

My Posts This: Topic  Forum
Rick's

epc2.
06-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
epc2
Senior Heliman
Location: Miami , Fl./S.Domingo.

My Posts This: Topic  Forum
Guys,

One more question?

Regarding blades , I have a set of MAH 700 G2 Kevlar available but I think they're too light for autos @164gr.

What do you think? , what blades are you using with your Evo head??

For tail blades I'll be using V's 95.

Anybody using Radix 690's or 710's any bogging with the 710's.

Thanks,

epc2.
06-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
epc2
Senior Heliman
Location: Miami , Fl./S.Domingo.

My Posts This: Topic  Forum
Thanks to all who replied to this post.

My Evo should be here tomorrow can't wait.

I ordered the QUK swashplate ( I hope it's a good upgrade ) and the metal washout base.

My setup:

-Ys 91
-Hatori SB 16FH
-9351 on Collective and cyclic
-9254 on throttle
-611 Gyro
-Fromeco 4800 batt and Arizona Reg
-No Governor
-Radix 690 and Rotortech's 105

What do you think???

Am I going to be happy with the QUK swashplate??

Any mods needed during the building??

Thanks ,

epc2.
06-15-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
oldboldpilot
Key Veteran
Location: Southern California

My Posts This: Topic  Forum
epc2,

I just bought an Evo 90 kit, and it came with the 8.45 ratio for the YS..

Helis are Man's Defiance of the Laws of Nature - OCHC
06-28-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]2587 viewsPOST REPLY
ReadyHeli . Power Helis . CANOMOD

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > Buying a Hirobo 90 Evo or X Spec?????????
 Print TOPIC Advertisers 

Subscribe to This Topic

Friday, March 19 - 1:09 am - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF