scottc
Key Veteran
Location: shakopee minnesota..USA
My Posts This: Topic Forum | well thats odd the new fan i have in my tool box is the same, 19 mm from the plastic bottom to the top , could any thing else be in the way, now here is what i did to mine that iam still flying,,,,dident feel like waiting a week for the new fan. i used a raptor 30 fan and yes i know its shorter to, i stacked washers under the fan till i was at the right hight with the clutch not hitting the top of the clutch bell, after getting the new fan i just never put the new one in, i figured why fix it if it works.You could also try usine a raptor 50 but you would need to be around 4 mm shorter on the whole thickness of the fan compared to the gohbee fan or make sure the fan just dose not hit the clutch bell.some things to try. scott
Hey I didn't ask for this fetish.!!!But I'am sure paying for it.... |
ok from the plastic bottom to the top is 19 mm
well all seriousness aside will try whats been suggested and let yall know....cheers
anyway,got an idea re this problem and that would be>>>plug the motor mount holes and redrill further down, I believe thiers enuff meat, can I geta vote on that??
