RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 362 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]5139 viewsTOPIC CLOSED
Midland Helicopters . HeliProz . Ron’s HeliProz South

.
.
Scale Model RC Helicopters > Raptor 30 V2 Scale Jet Ranger
 
 
kbheli
Senior Heliman
Location: Mascotte, FL USA

My Posts This: Topic  Forum		This is my new Scale project Raptor 30 V2 TT.39, 49 Ball Bearings, Raptor 50 tail boom and belt, 600MM Woodies, Which I will upgrade to Carbon blades when finish,A JR XP6102 Radio with DS537 Servos.Raptor in test hover and being setup before body gets painted and installed into mechanics.


05-14-2006 02:51 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
lineman55
Senior Heliman
Location: Connecticut

My Posts This: Topic  Forum		Please show us some progress reports as you go through the build.I am planning on using the exact mech and fuse.Is that a Funkey fuse?
Do you forsee having to mod the pitch arm by cutting?

Looks great! enjoy your build!

It only takes two things to fly -- airspeed and money
05-14-2006 03:06 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al- home of army aviation

My Posts This: Topic  Forum		awsome combo you got there.
Lineman, that is a funkey 50 size fuse and there are no mods required for the arm with this fuse. i am doing a new OH58D with this same fuse. it is very nice. good luck and have fun with yur project.

drive a rotary, fly a rotorcraft
05-14-2006 03:15 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
kbheli
Senior Heliman
Location: Mascotte, FL USA

My Posts This: Topic  Forum		Raptor 30 V2 Scale Jet Ranger

Hi everybody

Copter Doctor said it all. No Mod to this body
05-14-2006 03:19 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
RonRock
Senior Heliman
Location: Underwood, Iowa USA

My Posts This: Topic  Forum		Where is the best place to buy the fuse?
05-15-2006 12:04 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al- home of army aviation

My Posts This: Topic  Forum		see the ad for century on the home page or here at http://www.centuryheli.com/products...l?currentid=247

drive a rotary, fly a rotorcraft
05-15-2006 12:11 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Mani
Heliman
Location: Encino, CA

My Posts This: Topic  Forum		Correct me if I'm wrong but that looks like a Long ranger. You'll love this project. I did one few months back and it was a great project. [See my gallery for pics]
Mani
05-15-2006 08:16 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al- home of army aviation

My Posts This: Topic  Forum		nope, its a jetranger. i have one i am converting to a 58D for my shuttle.

drive a rotary, fly a rotorcraft
05-15-2006 11:12 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
HELIVAGUY
Senior Heliman
Location: Monmouth County,NJ USA

My Posts This: Topic  Forum		Raptor 30 V2 Scale Jet Ranger

you mean all i need for my rappy 30 v2 is a 50 belt,tail boom and 600mm blades and i shove her in that century/funkey jet ranger 50 size fuse with no mods???...if so im sold
05-16-2006 10:21 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al- home of army aviation

My Posts This: Topic  Forum		pretty much. i sized up my rappy in the fuse and it sized up well. it is a shuttle however that will reside in this one. sure there will be some trimming required on the pitch arm but so minor it isnt even an issue. maybe cutting the front of the arm where the fwd ball link is, and using the closer one to the servo. no sweat.



drive a rotary, fly a rotorcraft
05-16-2006 10:50 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
RonRock
Senior Heliman
Location: Underwood, Iowa USA

My Posts This: Topic  Forum		Thanks, CopDoc, I'm like Heliva it looks almost too easy not to do. I'm in.
05-16-2006 11:24 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
HELIVAGUY
Senior Heliman
Location: Monmouth County,NJ USA

My Posts This: Topic  Forum		Cool! thanks for posting those pics,
do you know which muffler i would have to use?
do you think other century 50 scale fuses would work also?
Thanks again!
05-16-2006 11:24 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al- home of army aviation

My Posts This: Topic  Forum		if you have a muffler like the ones in the pics or similar, you should have no problems. the lip next to the muffler in the pics should be trimmed to give about an eigth of an inch or so clearance so it doesnt try to melt the glasswork right there. i would like to say that all these 50 size fuses were designed with the rappy in mind. so it is all about which one you want.



drive a rotary, fly a rotorcraft
05-16-2006 11:43 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
kbheli
Senior Heliman
Location: Mascotte, FL USA

My Posts This: Topic  Forum		Raptor 30 V2 Scale Jet Ranger

Copter Doctor:

I'am using TT stock muffler that came with TT.39

Thanks KBHeli
05-16-2006 11:50 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al- home of army aviation

My Posts This: Topic  Forum		cool deal!!
clearly there is plenty of room to use any std size muffler.

drive a rotary, fly a rotorcraft
05-17-2006 12:01 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
HELIVAGUY
Senior Heliman
Location: Monmouth County,NJ USA

My Posts This: Topic  Forum		AWWWWESOM!
Thanks again Copter Docter.
05-17-2006 09:05 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
HELIVAGUY
Senior Heliman
Location: Monmouth County,NJ USA

My Posts This: Topic  Forum		Raptor 30 V2 Scale Jet Ranger

ok so i got the 50 tailboom and belt installed and test run,the century .50 jet ranger fuse is on the way.
now what would be good throttle and pitch curves for this as its my first scale project and i have no interest in 3d flying.
thanks all
05-30-2006 09:53 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
kbheli
Senior Heliman
Location: Mascotte, FL USA

My Posts This: Topic  Forum		Raptor 30 V2 Scale Jet Ranger

HELIVAGUY

There should be no other set up the Fuse is very light. What size motor are you using,At this time my jet ranger will be paint as Florida Highway Patrol Colors, They no longer have their heli's anymore to costly so they use airplanes. I work for Goodyear and work on their patrol cars,I will be posting more pictures in the near future. I forgot I have pics of the FHP Heli. Any More info you can e-mail me. Thanks Ken kbheli
05-31-2006 12:20 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
HELIVAGUY
Senior Heliman
Location: Monmouth County,NJ USA

My Posts This: Topic  Forum		Raptor 30 V2 Scale Jet Ranger

thanks ken,
i am using the tt.39 engine with stock muffler.
i plan to decorate it as nj state police heli.
are you using 550mm blades or 600?
05-31-2006 02:31 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
kbheli
Senior Heliman
Location: Mascotte, FL USA

My Posts This: Topic  Forum		Raptor 30 V2 Scale Jet Ranger

I'am using 600 woodies for now and will upgrade to CF blades,TT.39 stock muffler.
05-31-2006 02:41 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]5139 viewsTOPIC CLOSED
MTA Hobbies . Model Rectifier Corp . ReadyHeli

.
.
Scale Model RC Helicopters > Raptor 30 V2 Scale Jet Ranger
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 8:21 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF