RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 864 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page2047 viewsPOST REPLY
Midland Helicopters . HeliProz . Ron’s HeliProz South

.
.
Thunder Tiger Raptors 30-90 - Imperio > raptor 90se setup
 
 
rookie5
Veteran
Location: Harlow, Essex - United Kingdom

My Posts This: Topic  Forum		hey guys im looking at buying a raptor 90se and would like your opinion on which are the best servos to use. i would also like your opinions on battery setup like with a lipo etc.

i am well into aggressive 3d if that helps and i also fly futaba.


thanks
sam
05-10-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Jag72
Elite Veteran
Location: 20 minutes south of Boston Mass...

My Posts This: Topic  Forum		rap 90se...

Tried and true performers for servos are the Airtronics 94758's running at 6v. Put 3 on the cyclic and collective and you'll have a nice handling machine. I run them on mine and they are great...these are the same servos that Alan Szabo uses ...I would run the Arizona dual regulator also with the 4800mah fromeco pack and the heavy duty flag pin switch...nice setup...

05-10-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
rookie5
Veteran
Location: Harlow, Essex - United Kingdom

My Posts This: Topic  Forum		where can i buy airtronic servos ?
05-10-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
raptor.heli
Senior Heliman
Location: Westyorkshire uk

My Posts This: Topic  Forum		how about 9255x2 and 9350 pitch



simon
05-10-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
rob10000
Key Veteran
Location: Western Massachusettes

My Posts This: Topic  Forum		The Airtronics 94758Z stomps all over those Futaba servos. Remember, he's looking for the best servos.
The S9255 are slow .17s for 60 degrees of movement vs the .06 speed of the Airtronics. The S9350 are a little better, but they are still only half as fast as the Airtronics.
05-11-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
BARTGALAMBOS
Veteran
Location: Huntsville, Alabama! U. S. A.

My Posts This: Topic  Forum		The Airtronics 94758Z

The only way to go, until somebody comes out with one that does 60 degrees in .01 sec!

Bart

Precious Metal Investor!!!
05-11-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
colsy
Elite Veteran
Location: Cambridge, UK

My Posts This: Topic  Forum		Hi, rookie5
I have a 90SE on the way, and the servo's i have brought are the new ACE DS1015'S Spec's @6V are 14.5kg-cm(201oz) /.10 transit.
Currently have one fitted to my Raptor 50 on collective running 6v's, they have a very narrow deadband and stacks of guts, with very accurate centering.. initially i am very impressed.
Also experimenting with a Hitec HS6965HB (Transit .08)on the tail coupled to a CSM 720, all @ 6V's, which eliminates the need for a stepdown or dual output regulator.
I have the Hitec 6965's on the cyclic of another raptor, but they do not centre as well as the ACE, or my JR'S, so for me,
ACE DS 1015'S on Cyclic and Collective, and Hitec 6965 Karbonites on throttle and rudder, for a true 6V setup, this is with a Duralite 6V regulator's and 3s1p 1600ma (110grammes)Flight Power Lipo's..
Servo's are from Inwood's ACE@£58 and 6965's@£46.
Hope this gives you something else to consider.
Colin..............

Only Quote From Experience.
05-11-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
rookie5
Veteran
Location: Harlow, Essex - United Kingdom

My Posts This: Topic  Forum		ok so i figure i'll go with the airtronics 94758's do i put of those on the tail as well or not ??

thanks
sam
05-13-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Jude23
Heliman
Location: Flint, MI USA

My Posts This: Topic  Forum		It sounds like money is not an option here so I would highly recommend the 611 gyro that comes with the 9256 servo.
05-14-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Blademan7065
Veteran
Location: Westfield, Ma.

My Posts This: Topic  Forum		Dont put the 94758 on the tail. The higher frame rate that the gyro sends to the servo will burn out the 94758.

Fromeco Rep
Magnum Fuel Rep
Jersey Modeler Rep

Check out my homepage
05-14-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
rookie5
Veteran
Location: Harlow, Essex - United Kingdom

My Posts This: Topic  Forum		thanks for all your input guys i think i'll go with a csm 720 ?

cheers
sam
05-14-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
JakeDaSnake
Senior Heliman
Location: Mobile AL

My Posts This: Topic  Forum		A 611 can run on 6V's right? I got 2 buddies that are running there 611 and 9254's and 401's all on 6 volts!

But those Airtronics servos are very hard to beat!

Later,
Jake

Jake Wiggins: AMA 856496
05-14-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
cdrking
Elite Veteran
Location: Seattle

My Posts This: Topic  Forum		jaganino

Does that machine weigh about 14 pounds????

Jeff
05-14-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Blademan7065
Veteran
Location: Westfield, Ma.

My Posts This: Topic  Forum		cdrking

I have flown it and it flys remarkably well. I thought that it was going to feel like a ton of bricks too, but it doesnt. It feels great.

Fromeco Rep
Magnum Fuel Rep
Jersey Modeler Rep

Check out my homepage
05-14-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page2047 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . ReadyHeli

.
.
Thunder Tiger Raptors 30-90 - Imperio > raptor 90se setup
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 10:18 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF