RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 685 ONLINE 80 EVENTS SEARCH REGISTER  START HERE
 
1 page1210 viewsPOST REPLY
Heli-Max . Hobby Hut . Heli Wholesaler

.
.
Thunder Tiger Raptors 30-90 - Imperio > R90SE elevator lever play
 
 
Yug
rrMaster
Location: UK. Herts

My Posts This: Topic  Forum		I've noticed a bit a play on the metal lever that is pinned onto the metal elevator control arm. What does anyone do about this ? loctite ?
wait for the pin to sheer in flight?
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
tris_heli
Key Veteran
Location: Lidlington, Bedfordshire, UK

My Posts This: Topic  Forum		Hi Guy,

I had the same on both of mine with the hole going slightly too large for the pin.

Some of the stupidly strong thread lock that comes with the trex sorted mine but not really looking forward to taking it a part !....
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Yug
rrMaster
Location: UK. Herts

My Posts This: Topic  Forum		Hiya.
Perhaps a bit of blue to start with and see how it goes after a few days of hardening.
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Tday
Key Veteran
Location: Needham, MA

My Posts This: Topic  Forum		Yeah, blue works just great. Tom
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Jerry Sudimick
Veteran
Location: Connecticut

My Posts This: Topic  Forum		I've used a little green loctite there with no issues.

Jerry
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Bobwho52
Senior Heliman
Location: Phoenix Arizona

My Posts This: Topic  Forum		It is a problem. My R90SE went in two weeks ago because the pin came out some how. Luckly it was from a hover and suddenly flipped over forward and went in on its top from about 10 feet up. Except for the blades it was only about $50 in parts. I think the green loc-tite is the answer I hope)

A transplant saved my life. Sign your donors card today
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Yug
rrMaster
Location: UK. Herts

My Posts This: Topic  Forum		TT are you listening ?
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
DOKEY
rrProfessor
Location: Northampton UK

My Posts This: Topic  Forum		Sorry, I think Im a little slow of the mark today. What parts are you on about Guy, this one ??

05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Yug
rrMaster
Location: UK. Herts

My Posts This: Topic  Forum		Yep thats the little blighter
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
DOKEY
rrProfessor
Location: Northampton UK

My Posts This: Topic  Forum		Thanks, had to check mine to be on the safe side as you mentioned it!

I must have a good snug fitting one
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Chris Lupa
Key Veteran
Location: Lancaster, UK

My Posts This: Topic  Forum		My first crash EVER on my 90SE was my first "hovering" flight with it in my back garden. I forgot to put the grub screw in that holds that pin in place! Ripped the hole back off But that was my own stupid fault! I wasen't happy, as literally 7 days before my tail gear box in my Vigor CS failed!

Sponsored by CSM and QuickUK
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
sambogosse
Heliman
Location: France

My Posts This: Topic  Forum		Hi,

I got the problem also. I had to drill the holes to 2.3 mm and insert a new pin to replace the original 2mm one. The pin fit tightly as I had to force a little to put it in place. No problem since the modification was made.
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Mr Rob
Senior Heliman
Location: uk

My Posts This: Topic  Forum		I just Drilled a small hole in the top of the leaver, and threaded a grub screw in it.

Now it holds as tight as you like.
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Yug
rrMaster
Location: UK. Herts

My Posts This: Topic  Forum		The epoxy, I mean loctite has set and it's looking good.
Naughty TT
05-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Jerry Sudimick
Veteran
Location: Connecticut

My Posts This: Topic  Forum
Quote 
TT are you listening ?


They are now.....I'll pass it along. I found the same issue. I've been told that the blue anodized upgrade is better because the blue makes the tolerances a little tighter.

The pins are hardened throughout the heli. Setscrews don't traditionally bite hardened pins. Note the lack of marks on the pins when they are removed as evidence.

This is the reason the setscrews sometimes relinquish their grip on the TR drive pins and on this pin. Hence the use of heat shrink and green loctite in several spots.

Jerry
05-10-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Tday
Key Veteran
Location: Needham, MA

My Posts This: Topic  Forum		Jerry,

On my Rap 90's, the pin can be held tightly (marks or no) and without locktite, the lever has play in/out. The aileron link can actually rub/wear on the lever too. I've never lost a pin, but it's sloppy nonetheless---hence the locktite.

Tom
05-10-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page1210 viewsPOST REPLY
JR-Spektrum . E-flite . Fast Lad Performance

.
.
Thunder Tiger Raptors 30-90 - Imperio > R90SE elevator lever play
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, March 21 - 12:51 am - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF