RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 724 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
4 pages [ <<    <     2      3     ( 4 )    >    >> ]6171 viewsPOST REPLY
Futaba-RC . Boca Bearings . XHELI.COM

.
.
e-Century Hummingbird - Swift > SWIFT - The good stuff... discuss it all here !
 
 
AV8TOR
Veteran
Location: Central Ohio

My Posts This: Topic  Forum

Quote 
Swift Video

Team Century.

Genovia, when I go to this link I just get tiny-url.com and I see no video.
06-25-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Pistol_Pete
Elite Veteran
Location: Tampa Bay non-Buccaneer

My Posts This: Topic  Forum		Need help with swift that shuts off after any high collective....

I have same set up but use CC phoenix-80.

Lets us know the settings on your ESC...definitely sounds like the culprit.

<><>...the lunatic is in my head...<><>
06-25-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
stirfri4202
Heliman
Location: Troy, N.Y.

My Posts This: Topic  Forum		hey everybody,

I had an axi 2826-08 w/ 4cells and its sporty, did some rolls but it gets HOT about 186* F

I just bought a 3700 6s flightpower and a tango 45-10 I have a CC60 is that going to be enough...

is anyone running the tango 45-10 with a 6s how is it whats your CC settings? gov. or (Heli)fixed endpoints??

~Dan~
DX7, Trex600N - ar7100R - 9452's - GY611 w/BLS251 - OS-50H - Hatori Pipe
06-30-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Pistol_Pete
Elite Veteran
Location: Tampa Bay non-Buccaneer

My Posts This: Topic  Forum		Ref: cc-60...
see my homepage...first post
click on cc-80...same settings.

<><>...the lunatic is in my head...<><>
06-30-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
DIM
Heliman
Location: Athens Greece

My Posts This: Topic  Forum		I just bought a 3700 6s flightpower and a tango 45-10 I have a CC60 is that going to be enough...

Same setup with jazz 55-6-18.I run 9t pinion -2000-2100 hs everything is cool and happyAmpwise you are going to be ok with the 60,be carefull with the pinion choice .
06-30-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
TomC
Veteran
Location: Gold Coast, Queensland, Australia

My Posts This: Topic  Forum		Fribb,

Sounds like you are getting some RF noise. Under load (lots of collective) RF noise might be shutting your motor down.

Try installing a ferrite ring on your esc lead, just before it goes into your receiver. I use a 100mm servo lead and wrap it aroung 5 times around the ring, and plug it into the esc and rec'r.

Ferrite rings have helped make all my +3 lipo heli set-ups a lot more glitch-free, and have improved their range as well. Hope this helps.

Cheers,

Tom C
06-30-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
stirfri4202
Heliman
Location: Troy, N.Y.

My Posts This: Topic  Forum		if your using a UBEC you want a ring around the lead thet goes into the RX also. worked for me.

~Dan~
DX7, Trex600N - ar7100R - 9452's - GY611 w/BLS251 - OS-50H - Hatori Pipe
07-01-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
tikaboo
Senior Heliman
Location: Fylde Coast, UK

My Posts This: Topic  Forum		Av8tor....take out the hyphen.
07-01-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
rcaddition
Senior Heliman
Location: military

My Posts This: Topic  Forum		disable your low voltage cutoff.

I'm back...God please help me be nice to my wallet!
07-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
stirfri4202
Heliman
Location: Troy, N.Y.

My Posts This: Topic  Forum		so with the 6s in it what should my cut off volt. be?

~Dan~
DX7, Trex600N - ar7100R - 9452's - GY611 w/BLS251 - OS-50H - Hatori Pipe
07-12-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
SRH990
Key Veteran
Location: Birmingham, UK

My Posts This: Topic  Forum		Mines set at 4V, I fly by my transmitter timer, not the ESC's low voltage cutoff, you don't want a motor cut whilst inverted 2 feet off the ground

Steve -Trex 700N, Trex 600N, Raptor 550E, 450SE, Mini Titan, Logo 5003D, Beam E4
07-12-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Pistol_Pete
Elite Veteran
Location: Tampa Bay non-Buccaneer

My Posts This: Topic  Forum		CC-80 settings (same as 60)

Cut-off Voltage = 1 / Auto Lipo *default (disabled with removal of red wire)

Current Limiting = 5 / Disabled

Brake Type = 5 / Brake Disabled

Throtle Type = 3 for low or 4 for high Governor

Electronic timing advance = 2 / Standard Advance

Cutoff Type = 2 / Soft cutoff

Soft Start = 2 / Soft Start (use faststart for practicing autos and make sure blades are tight)

PWM Switching Rate = 2 / 26khz

These are my settings using a tango 45-10 and 6S...and it works great.

<><>...the lunatic is in my head...<><>
07-12-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
stirfri4202
Heliman
Location: Troy, N.Y.

My Posts This: Topic  Forum		thanks pete!

verry helpful

~Dan~
DX7, Trex600N - ar7100R - 9452's - GY611 w/BLS251 - OS-50H - Hatori Pipe
07-20-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
stpeteheli
Senior Heliman
Location: St. Petersburg, FL

My Posts This: Topic  Forum		Excellent cust service!

Just wanted to mention that I have received outstanding customer service from all the staff at Century!

Niles

Swift C550, Z30A-800 11T, CC45HV, 7s MaxAmp - 8s eMoli, DX7
08-29-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
4 pages [ <<    <     2      3     ( 4 )    >    >> ]6171 viewsPOST REPLY
Autography FlightPower . Advantage Hobby . Revolution Models

.
.
e-Century Hummingbird - Swift > SWIFT - The good stuff... discuss it all here !
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 22 - 1:10 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF