MRC-Hirobo
rrAdvertiser
Location: Edison, NJ
My Posts This: Topic Forum | Okay guys, here is the first release info on the NEW Lepton Electric series heli from Hirobo. The First release is an EX version. Some specifications may change but this is what we are expecting from Hirobo. More to come later!
Name: LEPTON EX
Length: 837mm 32.95 in
Width: 144mm 5.67 in
Height: 281 11.06 in
Weight: 1600g 3.5lbs
Rotor Dia: 955mm 37.6 in
Linkage: Push Pull 120 CCPM
Drive train: DTDS gear set, belt drive to tail
RPM: 1800-1900 hover
2600 for aerobatics on 4S power
Main Blade: 425mm, 50g Symmetrical FRP
Tail Rotor Dia: 160mm 6.3 in.
Tail Rotor blades: 54mm
Rotor Head: All metal SZ-M, Swash, washout, mixing levers all metal
Main Frame: Carbon Fiber
Gear ratio: 3.9:1:4 for 4S, 3.61:1:4 for 3S.
Main gear: 94T
Pinion Gear : 24t ( for 4S set up), 26T pinion for 3 cell, both included in kit.
Motor: 890KV outrunner with 5mm shaft and attached fan req'd
Speed Control: up to 4 cell lipo, 60A-80A, BEC req'd, Governor suggested
Battery: 4s1p 3000-3700 or twin 3 cell 2100's in parallel okay.
Gyro: 401 with 9650 servo recommended, 9254 too big
Servos: Futaba s3102 or similiar, standard servos too big.
Receiver: PCM only, PPM or FM receiver not recommended
Flight Performance: 10mins normal, 6min 3D
Other: Blade support included for storage.
Only the kit with no electronics will be initially released. We should have delivery in June 2006. A full version with battery, special charger, speed control and motor will come later in the season.
Street cost anticipated at US $600-650.00
First shipment almost sold out. If you want one, order now!
          
-Greg G.- |
