Yeah, so it's same size with cp2 but the king rotorhead higher than cp2 rotorhead so do the main blade.
Do you think possible or not if i using DD motor with small prop so the main blade won't hit the tail rotor....
I'm currently using brushless motor so i'm not worried the 4in1 mixer burnout.The only thing i concern the king main blade maybe won't fit into cp2 blade grip holder....
FX20V, they have about 1mm difference..
The bolt n the King is bigger too, so maybe you could put the plastic end of Cp2 blades to King`s blade to reduce the hole..
I tested the king blade on cp2 and whole cp2 much more stable.It's also tracking much better than cp2 main blade.I always got this problem tracking the cp2 main blade.Too bad it's hit the tail rotor if i pull down the elevator too much.
I shorten the honeybee king main blade to avoid hitting the tail rotor.The King blade now is just longer than stock cp2 by 11mm.It's hover pretty stable.I got tail boom strike cause by hard landing and suprisingly the king blade show no sign of damage and crack.
