RunRyder RC Helicopter Topic - Spektrum DX6 Radio Setup for Blade CP

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 844 ONLINE 18 EVENTS SEARCH REGISTER START HERE

2 pages [ << < 1 ( 2 ) > >> ]

3774 views

TOPIC CLOSED

HeliProz	.	Ron’s HeliProz South	.	MTA Hobbies
	.		.

e-E-Flite Blade MSR CP CX MCX 400-3D > Spektrum DX6 Radio Setup for Blade CP

Rotorjim
New Heliman
Location: Sacramento, Ca USA

My Posts This: Topic Forum

I understand this thread is refering to the Blade CP but I was wonder off hand if any one has attempted to setup their Blade 400 with this radio? I spent about three hours yesterday trying to get mine up but since the gyro isn't addressed I can't fly as anything above 50% throttle starts the tail wagging like crazy (holding in hand above my head). I am thinking that holding it in my hand may be causing this wag but an attempt to get airborn and have it wag like this would surely cause its loss. I did witness a guy flying a Trex 450XSE V2 with this radio and it flew nicely and 3D.
None of the attempts to manualy adjust gyro gain gained any results.
Any suggestions?
Thanks,
Jim

03-29-2009 01:24 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

JB642
Senior Heliman
Location: Waterford, MI - USA

My Posts This: Topic Forum

Rotorjim -

The programming between the two is a lot different - hope you find someone with specifics for you. I'm no longer using the DX6 or flying the CP.

JB

03-29-2009 10:48 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Rotorjim
New Heliman
Location: Sacramento, Ca USA

My Posts This: Topic Forum

Thanks JB.
I have already given up. I put my AR6100e back in it and reset and bound to the DX6i and everything works properly. It is just that I have seen people using ths radio with Trex's so assumed I may be able to use it as well. Probably can but I realy like the DX6i
Jim

03-30-2009 01:33 AM

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Coleco
Senior Heliman
Location: Anaheim, CA - Orange County

My Posts This: Topic Forum

Will this work with on a DX6i and Blade CP Pro with a spectrum rec.

I entered the setting and it still will not hover, I will be looking it this on Friday my day off.

Thanks,

Jerry

G=C800:5

03-31-2009 02:22 PM

PROFILE PM EMAIL POSTS BUDDY IGNORE

2 pages [ << < 1 ( 2 ) > >> ]

3774 views

TOPIC CLOSED

Model Rectifier Corp	.	Scorpion Power System	.	RCHover
	.		.

e-E-Flite Blade MSR CP CX MCX 400-3D > Spektrum DX6 Radio Setup for Blade CP

Print TOPIC

Advertisers

Subscribe to This Topic