RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 365 ONLINE 17 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <     1     ( 2 )    >    >> ]3398 viewsPOST REPLY
Boca Bearings . XHELI.COM . Autography FlightPower

.
.
e-E-Flite Blade MSR CP CX MCX 400-3D > burnt 4-in-1!!
 
 
murp
Senior Heliman
Location: Nova Scotia, Canada

My Posts This: Topic  Forum

I have a picture of the ESC from the 4-in-1, I am going to annotate it to show which parts were replaced (and also to point what the basic parts are). Adding pictures to posts seems complicated? am I missing something? Anyone who would like to see the picture send me a PM with an e-mail. OR maybe someone can help clarify how to put pictures in posts.
03-19-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Deves
Heliman
Location: Anaheim CA.

My Posts This: Topic  Forum		Murp send me the pics!
03-19-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
marke
Senior Heliman
Location: hamburg NY USA

My Posts This: Topic  Forum		murp
could you please tell me what the digikey pn for the voltage regulator is from digikey? the only ones i found are from moeser- they are made by fairchild.

thank you
marke
05-23-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
murp
Senior Heliman
Location: Nova Scotia, Canada

My Posts This: Topic  Forum		I'll dig them out for you - BTW what is the part number of the Fairchild part you have found at Mouser?

murp
05-23-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
murp
Senior Heliman
Location: Nova Scotia, Canada

My Posts This: Topic  Forum		Marke,

Here is a photo of my 4in1 ESC showing where the Vregs are located and annotated giving details on which regulators I recommend for replacement.



I did a quick search of DK and found both parts I mention in stock. I used the TI part in mine and have flown it without a problem ever since.

murp
05-23-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
marke
Senior Heliman
Location: hamburg NY USA

My Posts This: Topic  Forum		great thank you for the help.
marke
05-24-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
cowplanet
Heliman
Location: westport

My Posts This: Topic  Forum		so i burned out my main motor esc in the 4-1... at the same time i lost a servo. this is all well and good because i got my BL in the mail today and now i dont need the fried 4-1 main esc. i am also getting an esc for my tail so i can add HH. seeing as i dont need either of the speed controls in the 4-1 can i take out that whole board and connect my power to the feed on the RX side? it would be sweet if i could just take out this sketchy fried accident waiting to ruin my day....
09-06-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Micro-Maniac
Elite Veteran
Location: Pasco,Washington Formerly: Captain Chaos

My Posts This: Topic  Forum		One of your new ESCs will supply power to the receiver - Both ESCs will be connected to the battery via a Y-harness - But you will want to pull the power wire to the receiver from one of the ESCs though so that only one ESC is supplying power to the receiver for proper function.
09-06-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]3398 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
e-E-Flite Blade MSR CP CX MCX 400-3D > burnt 4-in-1!!
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 8 - 8:46 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF