RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 512 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]3650 viewsPOST REPLY
Mikado Modellhubschrauber . Futaba-RC . Boca Bearings

.
.
e-Electric Conversions > E Rap 50
 
 
FlynHeli
Senior Heliman
Location: Las Vegas, NV

My Posts This: Topic  Forum		Is the Kohler Actro 24-5 Heli any good, I would use it in a tp packs conversion or what do you guys recommend? also what speed ctrl would be used? Also any recommendations.




.

Money conquers patience, If you have money you don't have to wait!
02-24-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
stanc
Key Veteran
Location: Conroe, TX

My Posts This: Topic  Forum		I'm using a Jazz 55-10-32 with a TPPacks conversion and the Actro 24-5 or the 24-4 will work. Hacker is suppose to have a new motor out any day that Gary says will be a good match for the TPPacks conversion.
02-24-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
dieterke
Heliman
Location: Switzerland

My Posts This: Topic  Forum		Hi,

i use the Kohler Actro 24-4 Heli with the TPPacks conversion Kit with the Raptor 30 Gear-set and 2 5-Cell Tanic-Packs with a Jazz 55-10-32.
The raptor 50 V2 flys great with verry good power 12 Min. and the 3,95 kg are o.K.

Best regards from Switzerland
Dieter
02-25-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
stanc
Key Veteran
Location: Conroe, TX

My Posts This: Topic  Forum		dieterke, are you using the TPPacks boxed version or the new version thats direct drive?
03-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
dieterke
Heliman
Location: Switzerland

My Posts This: Topic  Forum		Hi stanc

I use the direct drive Version with the Kohler Actro 24-4 Heli. Have a look there. http://runryder.com/helicopter/t236142p1/

Dieter


Look my gallery
03-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
stanc
Key Veteran
Location: Conroe, TX

My Posts This: Topic  Forum		dieterke, those Tanic Packs look like they are they same price as the TP Packs. 5S2P 4160 mah are $279.95 each and the size is a different configuration. I noticed you had one pack in the middle of the heli, I need to place one there also because the CG is a bit forward. If I did that the size of these packs would be OK.
03-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
FlynHeli
Senior Heliman
Location: Las Vegas, NV

My Posts This: Topic  Forum		Well I am going with

Neu 1912/1.5y
Hacker 48-0 Heli ESC
and 10s 2p thunder power battery
tppacks conversion
I am also going to use a duralite regulator,
a 2 cell lipo for the reciver and servos.

Hope I chose a good combo???

flynheli


.

Money conquers patience, If you have money you don't have to wait!
03-11-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Thuvanduc
Senior Heliman
Location: Salt Lake City, Utah

My Posts This: Topic  Forum		Flynheli,

You will love that 1912x1.5Y. I have this motor with the Jazz controller and the Fp 10S1p Evo 20 in my 3DMP and the machine is an endless power heli.

Enjoy!
Duc
03-12-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
FlynHeli
Senior Heliman
Location: Las Vegas, NV

My Posts This: Topic  Forum		How is the esc I am getting is it enough?

it says 48 amp

Money conquers patience, If you have money you don't have to wait!
03-12-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
dieterke
Heliman
Location: Switzerland

My Posts This: Topic  Forum		Hi stanc

I look your gallery and see your e-Raptor. Is the CG not to much in the Front ?
My balance with the two Tanic-Packs is the same which I have with the TT engine.

Dieter
03-12-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
stanc
Key Veteran
Location: Conroe, TX

My Posts This: Topic  Forum		Yes the CG is forward but it flies great, the problem I'm haveing if you want to call it a problem is my head speed. With the throttle around 90 or so on the curve my head speed is 2300. Gary Goodrum says and my calculation say it should be 2000. I have 2 - 5S2P, 1912 1.5Y, 9T pinion, 86T main and Jazz 55-10-32. I'm only getting 10 min or so flight time, nothing is over heating at that head speed. Motor ~125, esc ~95 - 100 and packs ~90 deg F. Anyone have any ideas why the head speed is that high?
03-12-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Hoverup
Elite Veteran
Location: Gulf Coast

My Posts This: Topic  Forum		What main rotor blades are you flying?

Cheers - Boyd
AMA 80393
IRCHA 3355
Major USAF
Retired
03-12-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
stanc
Key Veteran
Location: Conroe, TX

My Posts This: Topic  Forum		600 SABs
03-13-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
stanc
Key Veteran
Location: Conroe, TX

My Posts This: Topic  Forum		FlynHeli, are you using 1 - 10S2P pack or 2 - 5S2P packs? TPPacks recommends 2 - 5S2P packs for mounting up front, instead of below the CF frame stiffener.
03-13-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
FlynHeli
Senior Heliman
Location: Las Vegas, NV

My Posts This: Topic  Forum		Why is that I already ordered the 10s 2p




.

Money conquers patience, If you have money you don't have to wait!
03-13-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
stanc
Key Veteran
Location: Conroe, TX

My Posts This: Topic  Forum		I ordered the same pack when I ordered the electric conversion and the esc, Gary sent me an e-mail telling me he was sending two 5S2P instead of the one 10S2P, because of where you mount the packs. Go to my gallery and look at the the last of the first eight pics. Are you using the CCPM up-grade, if not maybe the one 10S2P pack might be better. You would probably have to mount it under the CF stiffener. Since I have the CCPM, I don't need the servo tray, so I cut off the servo boxes and retained the receiver tray and mounted the packs where you see them.
03-13-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
FlynHeli
Senior Heliman
Location: Las Vegas, NV

My Posts This: Topic  Forum		Ok stanc

I am not using the ccpm but I thought there was 4 stand offs the went between the CF Stiffener and frame?

Flynheli

Money conquers patience, If you have money you don't have to wait!
03-13-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
FlynHeli
Senior Heliman
Location: Las Vegas, NV

My Posts This: Topic  Forum		Ok got the heli together had to grind the frame to fit the 10s 2p can't wait to fly

Money conquers patience, If you have money you don't have to wait!
04-05-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
stanc
Key Veteran
Location: Conroe, TX

My Posts This: Topic  Forum		FlynHeli

How did you get the 10S2P pack between the motor and the frame stiffner? I haven't tried it yet but after measuring the distance between the two, doesn't look like enough room for the pack to fit between them.

Stan
04-05-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
FlynHeli
Senior Heliman
Location: Las Vegas, NV

My Posts This: Topic  Forum		I had no problem. i hade more of a problem between the front of the frame had to grind that out a little.

I did a test flight the other day this heli has incredible power. I did a full power climb out and my jaw droped to the ground.




.

Money conquers patience, If you have money you don't have to wait!
04-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
2 pages [ <<    <    ( 1 )     2     NEXT    >> ]3650 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
e-Electric Conversions > E Rap 50
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 22 - 6:06 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF