RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 375 ONLINE 17 EVENTS SEARCH REGISTER  START HERE
 
1 page2736 viewsPOST REPLY
Boca Bearings . XHELI.COM . Autography FlightPower

.
.
e-Robbe Eolo > My New Bird Spirit Pro Special Edition
 
 
Igor Nack
Heliman
Location: Moscow, Russia

My Posts This: Topic  Forum		I've finished my new bird. What I can say: top quality from Robbe. I think there was one of the best kit that I built. Respect to Robbe!!!
My configuration:
1. Hacker C40-9L 14Т
2. Hacker Master 40-3P Opto
3. BEC 4.8V
4. Thunder Power 4S2P
5. 3 Futaba S3150 and Futaba S9254 with CSM SL560 Micro Gyro.
6. Futaba R146iP reciever
7. CNC Servo Holder Set
8. Audible LiPo Voltage Guard
9. Heliup Gyro Tray
10. CNC Driver Yoke
11. Cuted K&S paddles (stock paddles from Robbe was so curved )
With such configuration I can say: Spirit Pro it's a ROCKET













Life's too short not to ...
02-21-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Lorents
Elite Veteran
Location: Oslo, Norway

My Posts This: Topic  Forum		Nice one Igor! Good luck on the maiden flight



What comes around goes around.
02-21-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Buzzsaw46
Veteran
Location: Spring Valley, MN.

My Posts This: Topic  Forum		Very nice Love your paint job!!
02-21-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Igor Nack
Heliman
Location: Moscow, Russia

My Posts This: Topic  Forum		It's a result of using Dupont paints and varnish and little bit of my hands

Life's too short not to ...
02-21-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
abormor
Heliman
Location: Gandia, Valencia, Spain

My Posts This: Topic  Forum		beautiful paint job and very nice eolo!
congratulations!
02-21-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Mike Pluhar
Senior Heliman
Location: On a Yacht

My Posts This: Topic  Forum		Very Very very nice I love the paint work. Its nice to see a new Eolo on Runryder

Mike
02-21-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
bighic
Senior Heliman
Location: Cumbria UK, the centre of the earth

My Posts This: Topic  Forum		Beautifully finished, lovely job I wish my Eolo looked half as good as yours.

Well done...

:

Cumbria UK, If crashing were a skill I would be world class...
02-22-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
HeliDuce
Senior Heliman
Location: Nashville, TN

My Posts This: Topic  Forum		Niceeeeeeeeee!

Egor your Eolo is one of the nicest I've seen anywhere! I look forward to hearing a flight report from you!

Gary
02-22-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Igor Nack
Heliman
Location: Moscow, Russia

My Posts This: Topic  Forum		Thank you very much, Gary. I'll write flight report as soon as weather in Moscow will give to me such chance.
Igor

Life's too short not to ...
02-22-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
darrens
Key Veteran
Location: United Kingdom

My Posts This: Topic  Forum		Igor, i have the same hacker motor for 4s and it will pull a 15t pinion just as well.....awsome power, give it a go.

He who dies with the most toys is the winner!
02-22-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Igor Nack
Heliman
Location: Moscow, Russia

My Posts This: Topic  Forum		Hi Darrens! Do you think 15T will give more power to Eolo? I'll try to fly with your setup too and post back my feelings. Could you tell me what is your head speed with such setup?
Igor

Life's too short not to ...
02-22-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
darrens
Key Veteran
Location: United Kingdom

My Posts This: Topic  Forum		I tried with the 14t first before the 15t and the 15t definately gives more power. As for the headspeed, I'm not sure as I have not tacked it yet, but it is extremely fast!!!!!
I'll tack it this weekend and let you know, but I have had a few flights on this now and the motor is not too hot. The batteries I use are the Evo 20's from Flightpower (20c rated) and they are cool after a full flight.

He who dies with the most toys is the winner!
02-22-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
HugeOne
Key Veteran
Location: Quebec, Canada

My Posts This: Topic  Forum		Darrens is right give the 15T a go, just keep track of lipo/motor temp a full aluminium bird like your must be on the heavy side. But, I think it must be cold where you are so it should not be a problem.

congrat! awesome eolo...

Raptor e620 w/V-bar, Tango 45-06, Phoenix 85HV, TrueRC 12S1P 4000mAh
02-22-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Igor Nack
Heliman
Location: Moscow, Russia

My Posts This: Topic  Forum		Thank you very much guys! I already recieved 15T and installed on my bird. But weather .... We have snow in Moscow now and I don't know when weather will be better. I'm waiting this moment.

Life's too short not to ...
02-23-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Laurens
Key Veteran
Location: Oegstgeest, NL

My Posts This: Topic  Forum		Great paintjob

TeamFlightpower, Team Flighttech
02-25-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Necroscope
Heliman
Location: New Zealand

My Posts This: Topic  Forum		Spirit Pro Special Edition

Nice job on the heli.
Like the little extra aluminium add on's.
I have also added the belt drive upgrade and a Quick-UK head.
Where did you get the CNC Servo Holder Set I would be interested in getting this for mine.
Battery is a Lite Storm HP-LVX3700-2P.
I can't take any credit for the canopies I had Mort at Just Canopies do them and what a fine he did, photos in my gallery.
Good to see another persons approach and set up for some ideas.
Nice work

If... she... weighs...the same as a duck,... she's made of wood And therefore? A witch!
02-27-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Igor Nack
Heliman
Location: Moscow, Russia

My Posts This: Topic  Forum		Hi Necroscope,
I bought CNC Servo Holder set for my Eolo from http://www.ercmarket.com. They are working exactly and quickly. And I found interesting company who are producing CF canopy for Spirit Pro. Please try: http://www.carboncopyuk.com/acatalog/Eolo_Spirit.html
I don't know how they work but I ordered one for my bird.
Igor

Life's too short not to ...
02-28-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page2736 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
e-Robbe Eolo > My New Bird Spirit Pro Special Edition
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 8 - 11:15 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF