RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 394 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
8 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ]29645 viewsPOST REPLY
Heli Wholesaler . JR-Spektrum . E-flite

.
.
Tandem Rotor Helis Vertol Chinook > Hirobo CH-47 Chinook - Build (updated October 8th, 08)
 
 
Chris Bergen
Elite Veteran
Location: location

My Posts This: Topic  Forum

Aha, another dedicated Hooker!! For any other Hookers out there, check out http://chinookcrews.com/.

You just might run into some old friends.

Chris Bergen
02-03-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
fitenfyr
rrProfessor
Location: Port Orchard, Washington

My Posts This: Topic  Forum		Heck with the Chinook...

I wanna see the build up on that flight suit.

Jason Stiffey
Fly Fast....Live Slow...
02-03-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
vroomz28
Senior Heliman
Location: Barstow, California

My Posts This: Topic  Forum		More Updates every day

Skids are for kids!

My gallery:
http://www.runryder.com/helicopter/gallery/37191/
02-03-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
dgshaffer
Elite Veteran
Location: New Jersey

My Posts This: Topic  Forum		I see someone else decided to outfit their tandem with a Hyper motor

Having fun yet?
02-03-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Salty
Elite Veteran
Location: Jville Fl...Ahhhh getting better

My Posts This: Topic  Forum		overkill rules!!!

"What the HELL was that?" Mayor of Hirshima 6 Aug 1945.
02-03-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
vroomz28
Senior Heliman
Location: Barstow, California

My Posts This: Topic  Forum		Updated 26 February 2006!!

I Finally took it up for some extended hover-work. It rained Saturday and was windy sunday, but I fought the wind to run a few tanks of fuel through my CH-47. It was hovering fairly stable despite 5 mph winds gusting to 12 mph.

My test flights showed I needed to increase the ATV settings for Pitch, roll, and yaw. The controls seemed real mushy and I had to add some Reverse-Expo to make it more sensitive. I also had to reduce the collective on the front disc to help it lift up evenly.
Copter Doctor took it up for a test flight and came to the similar conclution as I had. It would have plenty of control sometimes, then would have less control at other times. I'm going to ask Jeff Greene if he has any tips.

I'll post video tonight!

Skids are for kids!

My gallery:
http://www.runryder.com/helicopter/gallery/37191/
02-22-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
vroomz28
Senior Heliman
Location: Barstow, California

My Posts This: Topic  Forum		1st Video
2nd Test Flight!! 7-10 MPH Winds!!!

I flew for a while then Copter_Doctor had a chance to see how my CH-47 flew. Hopefully I'll get a less windy day soon!

http://www.runryder.com/helicopter/...nd_Test_flt.zip

I'm still working on the body and getting the kinks out of the Electronic Mixing!

PHOTO]/helicopter/gallery/37191/Family_in_Alabama_291.jpg[/PHOTO]

PHOTO]/helicopter/gallery/37191/Family_in_Alabama_291.jpg[/PHOTO]

Skids are for kids!

My gallery:
http://www.runryder.com/helicopter/gallery/37191/
02-27-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
dgshaffer
Elite Veteran
Location: New Jersey

My Posts This: Topic  Forum		I've been waiting for the winter winds to calm down. Seems every weekend up this way has been unusually windy. I'm in no rush so sooner or later I'll be up there with you. I'm looking foreword to the video!
02-27-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
joelduval
Senior Heliman
Location: Puyallup, Wa (south hill)

My Posts This: Topic  Forum		When the video is out, it will just put the icing on the cake for me and i will have to buy one for myself...
02-27-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
dgshaffer
Elite Veteran
Location: New Jersey

My Posts This: Topic  Forum		Yup... Wind is no friend to these tandems. Looks stable though considering. It should be much better when you take it out on a calm day.

Good to see another one in the air!
02-27-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
vroomz28
Senior Heliman
Location: Barstow, California

My Posts This: Topic  Forum		Sunday March 5th

My controls felt Mushy and the control responces were not as they should be. I talked to Jeff Green at Hirobo Here is what he told me

"Yes lowering the gyro sensitivity for the controls as well as overdriving the ATV's is the right method to quickly increase response.
I know my Rudder ATV is near max, 140 I believe. My roll and elevator are fine but the gains were reduced. You can also increase the output for those channels in the mixer, but I would try it in the radio first.
Also try increasing the head speed to 1500 or so. This will make the controls crisper in FFF. A governor helps it fly better as well.
I raised the RPMs and reduced the Elevator Gyro sensativity and it did help. I got it up in a nice stable hover for an entire tank of fuel. It still takes some strange cyclic compensation when you change the collective, but I'm getting closer.

more later...

Skids are for kids!

My gallery:
http://www.runryder.com/helicopter/gallery/37191/
03-06-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al- home of army aviation

My Posts This: Topic  Forum		steve and i messed around with his 47 again on sunday and it is flying much better than the last time out. the fore/aft still seems a bit funny, one minute you are pushing the stick forward and the next, you're pulling it back. still a bit more tweaking to do but it felt comfy enough that we both took it round a close circuit a few times. i finally got to see if i could taxi one of those things and it is easy to do. it wants to go but taxiing on the two rear wheels took a bit more work and though i got it to do it, it wasnt smooth. steve is just gonna have to allow me to practice that some more heh heh. steering while all wheels are on the ground though was a little tough. maybe steve will get the steering working on the right rear as on the fullsize.

drive a rotary, fly a rotorcraft
03-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
poboy
Senior Heliman
Location: alabama

My Posts This: Topic  Forum		nice looking machine. larry's top secret heli field.

Rappy 30, Starting over again!!
03-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Copter Doctor
Elite Veteran
Location: daleville/ft.rucker, al- home of army aviation

My Posts This: Topic  Forum		yep, been flying there for years now
anf food isnt far away

drive a rotary, fly a rotorcraft
03-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
vroomz28
Senior Heliman
Location: Barstow, California

My Posts This: Topic  Forum		I've got a few other things to fix before I add steering!!

I'm going to order that starter! To start my Hirobo chinook with my standard Hobico starter, we had to crack the glow plug. I'm going to get a dynatron to see if that fixes my problems.

Skids are for kids!

My gallery:
http://www.runryder.com/helicopter/gallery/37191/
03-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Camel Jokey
Heliman
Location: Dubai, United Arab Emirates.

My Posts This: Topic  Forum		I have a Chinook on order from Singapore hobby supplies, I should be with me around the first week of April, can you give me an opinion on the servos you use, I was thinking 8311's or something similar I like to fly JR, but maybe thay are too much, plus the cost is 100 US each thats 600 bucks just for servos!

The servos you are running on your Chinook are Futaba 9252's right? do you think they are good enough or with hindsight would you change them.
03-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Salty
Elite Veteran
Location: Jville Fl...Ahhhh getting better

My Posts This: Topic  Forum		in case you need to see the real deal I took the photos copter doctor sent to me and put them in my gallery

"What the HELL was that?" Mayor of Hirshima 6 Aug 1945.
03-07-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
vroomz28
Senior Heliman
Location: Barstow, California

My Posts This: Topic  Forum		rotorpsyco,

Thanks for posting those pics! That will help me out when I get to detailing.

I think you could use less expensive servos. The control movements are not fast enough to require such a high end servo.

Skids are for kids!

My gallery:
http://www.runryder.com/helicopter/gallery/37191/
03-17-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
vroomz28
Senior Heliman
Location: Barstow, California

My Posts This: Topic  Forum		I haven't had much time to work on the Chinook, I graduated Army Flight school on 23 March 2006 and had the family here. I think I have many of the kinks worked out and can start putting it in the body.

Here are some pictures flying around w/o body. It is doing better, but I had to get a better starter before I could put it in the body.



Skids are for kids!

My gallery:
http://www.runryder.com/helicopter/gallery/37191/
04-08-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
vroomz28
Senior Heliman
Location: Barstow, California

My Posts This: Topic  Forum

Skids are for kids!

My gallery:
http://www.runryder.com/helicopter/gallery/37191/
04-09-2006 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
8 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ]29645 viewsPOST REPLY
Fast Lad Performance . Ace Hobby . Esprit Model

.
.
Tandem Rotor Helis Vertol Chinook > Hirobo CH-47 Chinook - Build (updated October 8th, 08)
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 10:40 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF