RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 671 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
6 pages [ <<    <     4      5     ( 6 )    >    >> ]36718 viewsPOST REPLY
Midland Helicopters . HeliProz . Ron’s HeliProz South

.
.
e-Venom Air Corps Night Ranger - Ocean Rescue > Venom Night Ranger 3D
 
 
Paul Susbauer
Senior Heliman
Location: Spokane Valley, WA

My Posts This: Topic  Forum

Merril,
Now that I read your post more thoroughly, (well your other post about the tail motor) to push the pinion on, a drill press or vice works quite well. Support the rear of the motor, trying not to put pressure on the motor terminals. Then carefully press the pinion on with the vice, keeping everything square as you can bend the motor shafts. (Don't ask how I know)

If you have any other problems let me know.

--Paul

Ineptitude - If you can't learn to do something well, learn to enjoy doing it poorly.
04-16-2007 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
motorhead540
Heliman
Location: portland,oregon - USA

My Posts This: Topic  Forum		vnr3d main motor ??

goodevening tonight i was out flying my helis i flew my hawk sport then my axe cp then the night ranger 3d had one of the best flights i have every had with the night ranger then the mainmotor just quit no notice just shut off heli looks to have survived the landing ok a little hard but ok unplugged and checked power coming from 4&1 unit that reacts with thrttle but no main motor tail motor works but no main all other things work man was it finlly staring to fly good what happened on first set of transmitter batteries and now have lost a main and a tail motor what kind of life should we normally get any ideas merril
05-12-2007 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
motorhead540
Heliman
Location: portland,oregon - USA

My Posts This: Topic  Forum		main motor failed

good evening i just today got around to replacing my main motor that failed a couple of weeks ago removed it from airframe soldered new motor to harness and reinstalled set mesh and charged up my batteries went outside to fly it and now it will not even lift off the ground except a quick hop what is going on with it was flying great just prior to main motor failing have checked tracking pitch and have played around with plt and pit knobs after unlocking dip switch #8 that i had never even had to mess with prior to this thanks for any advice or ideas just seems to bog down when trying to lift off only hops merril
05-28-2007 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
promoto
Heliman
Location: Darlington UK

My Posts This: Topic  Forum		I know hate this Heli

Yep sick of it.
Had it about a couple of months. I have had it up and hovering without any problems at all. The only problem i have had with it is faulty parts. The first thing that happend was the Battery wire came off inside the shrink rap causing a big crash. My local model shop gave me some free blades thank god after i spoke with Paul from venom. Then I started having problems with my tail blade motor it would just stop or spin very quick causing the heli to crash. I tried setting it different but it did no good at all. Then after about 10 hours of flying time the motor burnt out so had to put another one in. And then 3 weeks ago it fell out of the sky yet again wrecking blades head stock etc. I have had 2 controllers in it both of those over heated when I say hot I am mean to the point of giving my thumb a bad burn. The Heli has gone back and that was nearly 4 weeks ago now and I still have not got it back. The shop has said that the distributor does not have the parts to fix it. Is that my problem NO.? What I have now done is bought a T-REX 450SE and its fab. I don’t want the venom back its not built to last and I have wasted so much time going back and forth to the model shop getting bits for it to keep it in the air when all the time it was not me that was causing the problem it was the heli. I would say that with buying it the mileage and the bits I have bought I could have bought another T-REX450 SE and that’s a fact. If I don’t get it back by the end of this week I am going to ask for my money back plus the extra battery I bought and the 4 sets of blades and seesaws’. If you want my advice save your money and buy a T-REX450SE V2 it’s just made to do the job. Sorry Venom I am very very disappointed with the 3D it started off great in the first couple of weeks and went down hill from there. I feel that I should have now been offered my money back or a new Heli.
06-03-2007 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
motorhead540
Heliman
Location: portland,oregon - USA

My Posts This: Topic  Forum		just bad luck

hi promoto i have had misc things fail on my vnr3d also jsut as i have had on my other helis but i have had good luck working thru the problems with paul from venom as far as the heli goes after i started to get used to how quick it responds i think its a good flyer which i enjoy flying have had mine since feb 07 1 tail motor and 1 main motor a few sets of blades but i had never even tried to fly a rc heli before christmas and now i have 7 helis including the venom and i fly it and my axe cp the most mainly due to easy of use and setup
06-08-2007 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
RAK402
Key Veteran
Location: Alhambra, CA

My Posts This: Topic  Forum		Promoto,

I have flown the heck out of mine, and it has been a very good little helicopter.

No mechanical failures and no radio problems.
06-08-2007 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
promoto
Heliman
Location: Darlington UK

My Posts This: Topic  Forum		I am pleased for you

I wish i had been that lucky with mine.
But i have not. its cost me more then i should have spent in the first couple of months of haveing a new heli. I have since bought the T-Rex 450 SE and a DX7 both are fantastic the heli is a joy to fly i will never go back to these types of helis ever again.
I am trying to sort out getting my money back now.
I hope you guys keeping on haveing good luck with yours.
All the best Mike
06-08-2007 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
motorhead540
Heliman
Location: portland,oregon - USA

My Posts This: Topic  Forum		vnr3d micro

not yet but it sure looks cool will get one or something very much like it after i get a little more experienced told that the smaller of a ccpm machine it is the more snappy the controls will be and my brief experience has showed me that that is very true of helis size does make a big defference on how easy they are to control
06-10-2007 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Camp
Senior Heliman
Location: Atlanta, GA

My Posts This: Topic  Forum		I'm not into negative feedback but no can do on this bird. Im sorry.
08-12-2007 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
fredwally
Heliman
Location: Melbourne, Australia

My Posts This: Topic  Forum		Dont buy it

promoto, is right they are a waste of money and time.
Buy a t-rex. or an aeroplane.
09-18-2007 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
6 pages [ <<    <     4      5     ( 6 )    >    >> ]36718 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . Scorpion Power System

.
.
e-Venom Air Corps Night Ranger - Ocean Rescue > Venom Night Ranger 3D
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 8 - 2:20 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF