Skeeter Pilot
Senior Heliman
Location: England
My Posts This: Topic Forum | balbs,
The 5 in 1 part number in one of my Century catalogues is shown as:
5 in 1 control board - CN2001A-2
and in another catalogue it is shown as:
Control Centre - CN2001-2
I think Century only do one unit called the 5 in 1. It looks like this:
It will work with any t/x. The unit comprises of:
1 x giro
2 x esc (main/tail)
1 x 4 channel r/x
1 x mixer (main to tail rotor mixing)
So far as the Picco Board goes, any of the three option will do. They are as follows:
1. Piccoboard (Standard) - Giro, 2xEsc, Mixer, 4 channel receiver - £49.99
2. Piccoboard (Plus) - Above plus Heading Hold Port and 6 ch. receiver. £99.99
3. Piccoboard (Pro) - Spec as 'Standard' plus heading hold module. £129.99
If you remove the H/hold module it automatically switches over to the built in standard rate giro.
I would go for the standard if you don't go for the 5 in 1. This is a pic of mine fitted with picoo Board Pro but with H/hold module removed.
SP
-----
If there is soil going over the canopy, you're too low! |
. Hopefully the Century 5in1 is compatible with both Tx.
