abormor Heliman Location: Gandia, Valencia, Spain
My Posts This: Topic Forum | today I finally flow the QJ-18.
I used two TP 3s3p 6000mah connected in series for 6s setting.
The pinnion on the hyperion was 20 T and the main rotor rpm were 1800.
It is a heavy setting and it flies very well, with good response and total autority, it stops and stay where you leave it. Nothing compare to my trex´s.
The hyperion 4025/10 got pretty hot ( too much to hold) and power was less than enought, it bog at full trotle to 1500rpm but I need to do more testing because I was only hovering arround today (rainy day here in valencia, spain).
I probably go to an acro motor or similar as gorgeous in another post sugested.
Thats all by now, the hyperion 4025/10 does not seem to be the way to go on 20T. |