RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 673 ONLINE 80 EVENTS SEARCH REGISTER  START HERE
 
16 pages [ <<    <     4      5     ( 6 )     7      8     NEXT    >> ]34528 viewsPOST REPLY
Mikado Modellhubschrauber . Futaba-RC . Boca Bearings

.
.
e-E-Flite Blade MSR SR CP CX MCX 400-3D > Brushless motor and stock 4in1 works!
 
 
midwestpilot
Elite Veteran
Location: Crystal Lake, IL

My Posts This: Topic  Forum		Stealth...

keep us informed on this motor...looks interesting!!

In life there is no spacebar!

Rich Erikson AMA 6175
12-12-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
stealth916
Veteran
Location: Rocklin, CA

My Posts This: Topic  Forum		Betafazzo - Your head speed must be too high.
12-12-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Awais
Senior Heliman
Location: Mississauga, Ontario - Canada

My Posts This: Topic  Forum		Betafazzo, try hooking up the stock main motor and see if the tail motor can keep up with it.

Awais
12-12-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Betofazzo
Veteran
Location: Venezuela

My Posts This: Topic  Forum		Yeah..,my stock 370 motor and 9t whit simetrical blades, 3 cell lipo work great whit the tail setup, (gws edp50/4520 prop), the himax 4100 have amazing power even whit 8t..

I'm charging batteries....
12-12-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Awais
Senior Heliman
Location: Mississauga, Ontario - Canada

My Posts This: Topic  Forum		I'm gonna go home and take a video of mine. I just put on a 9T pinion yesterday.

One thing you can do is go fully seperates. That'll mean esc/gyro/motor for tail. The motor everyone recommends is feigao long can motor 12x30mm 4100kv.

Awais
12-12-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
stealth916
Veteran
Location: Rocklin, CA

My Posts This: Topic  Forum		Betafazzo - are you using the stock Transmitter or programmable one? Thanks!
12-12-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
FlyrEric
Senior Heliman
Location: Gulf Coast FL

My Posts This: Topic  Forum		Don't know how many of y'all saw my other thread about going brushless, but I was wondering if anyone else has tried a solderless solution that is workable. I'm going to have a go at making some shorter servo wires. I may be a bit too ignorant, but I can't figure out how to use the stock gyro and get everything to plug into the 4in1.
Any tips, suggestions or thoughts would be great!
12-12-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Betofazzo
Veteran
Location: Venezuela

My Posts This: Topic  Forum		Stock radio my friend...

I'm charging batteries....
12-12-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
stealth916
Veteran
Location: Rocklin, CA

My Posts This: Topic  Forum		Betofazzo - thanks for the info. I think the reason others are successful with 4100Kv motor on 3s lipo, is because they have a programmable radio and are turning throttle down to 60-70%.

Is there any chance for you to try 2s lipo and 10t pinion?
12-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Awais
Senior Heliman
Location: Mississauga, Ontario - Canada

My Posts This: Topic  Forum		I think its a bad tail motor. I just flew mine with 4100kv 9t pinion with a gwd dd, and it keeps up with it great. I'm getting the yoyo , ended up crashing and the tail boom is gone now.
12-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
crazhorse
Senior Heliman
Location: texas

My Posts This: Topic  Forum		I have a razor mhv2 (4300kv) in my hb cp2, with the dd and a 3020 prop and a gy240 on the tail....... worked fine..... then I went and screwed up my settings on my 9c and wacked it into the ground. broke a part that nobody has in stock in the US. so i ordered 3 from ebay (coming from Hong Kong i think) may be grounded a while
12-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Awais
Senior Heliman
Location: Mississauga, Ontario - Canada

My Posts This: Topic  Forum		crazhorse, did you ever get the yoyo in your cp2? I just can't seem to solve it. I got all new head parts and its still doing it.
12-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
crazhorse
Senior Heliman
Location: texas

My Posts This: Topic  Forum		I just got it all set up on friday, its a bare airframe ...... it was fine the little i got to mess with it before i crashed.
12-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Awais
Senior Heliman
Location: Mississauga, Ontario - Canada

My Posts This: Topic  Forum		Hope you get it back up soon. I had a tail boom crash too

How does the GY240 hold the tail using the GWS DD motor?

Awais
12-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
crazhorse
Senior Heliman
Location: texas

My Posts This: Topic  Forum		it held the tail very well
12-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Hughes500E
Heliman
Location: Armstrong BC Canada

My Posts This: Topic  Forum		crazhorse:
What pinion did you use on your Razor? I just received mine!
12-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
crazhorse
Senior Heliman
Location: texas

My Posts This: Topic  Forum		I used a 8t off a blade motor, I didnt get to mess with it enough to get the pitch/throttle curves down all that well........... I got a eflight 3600kv for it but wanted to see how the razor did
12-13-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Hughes500E
Heliman
Location: Armstrong BC Canada

My Posts This: Topic  Forum		Cool, I bought an 8,9 and a ten I was thinking of putting the 8 on for longer flight times. How do you like the razor on it?
12-14-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
crazhorse
Senior Heliman
Location: texas

My Posts This: Topic  Forum		I think thats what made it seem so smooth, high headspeed with the razor motor
12-14-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Hughes500E
Heliman
Location: Armstrong BC Canada

My Posts This: Topic  Forum		cool, thanks for the help/input I'm looking forward to installing it!
Thanks again!
12-14-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
16 pages [ <<    <     4      5     ( 6 )     7      8     NEXT    >> ]34528 viewsPOST REPLY
XHELI.COM . Advantage Hobby . Revolution Models

.
.
e-E-Flite Blade MSR SR CP CX MCX 400-3D > Brushless motor and stock 4in1 works!
 Print TOPIC Advertisers 

Subscribe to This Topic

Saturday, March 20 - 6:21 pm - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF