RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 392 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
10 pages [ <<    <     6      7     ( 8 )     9      10     NEXT    >> ]35489 viewsTOPIC CLOSED
Thunder Power RC . Mikado Modellhubschrauber . Futaba-RC

.
.
e-Align T-REX 250-450-500-600 > IMPORTANT - SE Tail Hub - HS1127
 
 
aircare84
Senior Heliman
Location: Marysville,OH

My Posts This: Topic  Forum

Moneypit,
There's a place in Columbus,Hurricane Hobbies.
They had some on the wall last Fri.
Bit of a drive, call them, they might ship.

hogfarmer,
the HS1103 T/R is the same design type as the stock plastic except for the ball mounting. 1 bushing & 1 bearing per grip.
the center hub has spindles for the grips to ride on.
01-17-2006 02:04 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Saint728
rrProfessor
Location: Honolulu, Hawaii

My Posts This: Topic  Forum		Do you have a link to look at this HS1103 part you speak of?

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
MA Fury Extreme
Raptor 50 SE
01-17-2006 02:11 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
aircare84
Senior Heliman
Location: Marysville,OH

My Posts This: Topic  Forum		HS1103
http://www.helihobby.com/html/TREX4.html
01-17-2006 02:13 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Saint728
rrProfessor
Location: Honolulu, Hawaii

My Posts This: Topic  Forum		Oh, thanks for the link. Yeah those are the old ones that are no longer available. I guess some stores still have them in stock.

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
MA Fury Extreme
Raptor 50 SE
01-17-2006 02:20 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
hogfarmer
Heliman
Location:

My Posts This: Topic  Forum		Yes I ordered mine from AllERC.com. They said they will have the blue ones in stock as soon as the bolt issue is sorted out.
01-17-2006 02:50 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
tcfrum323
Senior Heliman
Location: Los Angeles CA

My Posts This: Topic  Forum		Hi everyone, new to the forum. I just got my trex se and wanted to know what's going on with the weak tail hub and what's going to be needed to fix this problem. With the few stories of tail parts flying, I'm not gonna take the chance.
01-23-2006 06:08 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Saint728
rrProfessor
Location: Honolulu, Hawaii

My Posts This: Topic  Forum		Don't you read the thread your posting to? It says a million times what the problem is and how to fix it. Your Trex 450 SE should have came with replacement screws for the tail. If it didn't I would go back to where you bought it from and ask for them.

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
MA Fury Extreme
Raptor 50 SE
01-23-2006 10:59 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
tcfrum323
Senior Heliman
Location: Los Angeles CA

My Posts This: Topic  Forum		Yes I did read the entire thread and there seems to be two conclusions: replacement screws from andy at align or the microheli tail assembly. I'm asking because the screws might not be good enough as someone had posted earlier a couple of pages back as changing out some of the tail assembly.
01-24-2006 06:14 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
UpstateRotor
Senior Heliman
Location: Upstate NY

My Posts This: Topic  Forum		FWIW

I just picked up a silver framed SE and it had the black bolts. As a side note, I could NOT pop apart the swash plate.
01-24-2006 05:28 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
TomRex
Elite Veteran
Location: West Palm Beach Join Date: 12-28-2005

My Posts This: Topic  Forum		Tail Slider control Arm

Any body notice the really bad job on the machining tolerance in the 1135 assembly? My tail rotor control (HT4004L) arm is a really bad example of what happens with TOO much SLOP. The hole at the bottom is way too big now and the top fingers has the same problem allowing the tail blades to move about an eight of an inch back and forth with my fingers (the servo is tight).This is with a hand full of flights on a new SE. Gee do you think this would give some tail wag problems? Should I rework it with a ball link fitting like the Hornet II fix? Maby I should by an aftermarket tail hub assembly and only to find soft metal issues after a few flights like everybody else. My main issue with the Trex SE is Aligns geo tolerancing of parts at the factory machining level. ISO 2000 Geo Tol don't apply to the necessity of proper fitting parts for a wanna bee precision machine turning thousands of RPMs and high freaquency vibrations that wear out parts in a few flights. The little cheap bastards don't get it do they? Sure tightening it all up may cost a little more in mfg costs but hell I'd pay a little more for a craft that has a better ware factor on parts that fit better and ware better directly due to the better fitting parts lack of vibration! DUH! Any body have a contact for a NEW tail control arm part #HT4004l? call me direct @ 561.541.5424
Thanks,
Tom J
01-28-2006 03:13 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
N111KX
Heliman
Location: Atlanta, GA USA

My Posts This: Topic  Forum		So...are the new t/r bolts a "hex-head" type? Or, how do I know that I have the good ones?
Thanks,
Kip
2850prm headspeed and keeping out of the t/r rotation line
02-03-2006 01:16 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
FunHeli1
Heliman
Location: Montgomery, AL

My Posts This: Topic  Forum		Yes they are black socket head caps. The faulty screws that come in the tail are nickel plated phillips head. When I ordered my tail rotor upgrade the nickel plated screws were what was included so emailed Andy at Align about the problem. Ten days later I had the new screws. Very prompt service if you ask me.

Shane
02-03-2006 02:56 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
N111KX
Heliman
Location: Atlanta, GA USA

My Posts This: Topic  Forum		Thanks. I'll get with Andy for the new ones. I beleive that I had one of the first new swashes but the same old t/r bolts...!
Kip
02-03-2006 03:20 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
N111KX
Heliman
Location: Atlanta, GA USA

My Posts This: Topic  Forum		Andy had the new bolts at my house in 3 business days...
Kip
02-06-2006 04:59 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
FunHeli1
Heliman
Location: Montgomery, AL

My Posts This: Topic  Forum		That rocks! That's awesome service if you ask me.

FunHeli1
02-06-2006 06:18 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
drksky
Senior Heliman
Location: Bloomington, Illinois

My Posts This: Topic  Forum		Just received my SE today, but haven't had a chance to inspect the tail assembly yet. I've read the whole thread and I think I've gathered that the black hex-head screws are the ones that I want holding the blade grips to the hub, correct?

I've looked through the whole parts list and don't see anything labeled 1127. The tail holder set in my manual is #HT1156, and I've got the new, flanged swash.
02-25-2006 06:45 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
Ozydego
Key Veteran
Location: Westerville, Ohio

My Posts This: Topic  Forum		I think the V2 SE ships with the fixed ttail bolts, but just look down into the tail blade grips, and if its shiny, then email Andy for replacements, but I could prolly guarantee you, you will see a duller black bolt in there and then its fine....

actually I know its fine because the V2 ships with the new stainless steel hub, and those came out after the bolt snafu, so they have been fixed...

But Honey, I can't live with just stock.....
02-25-2006 03:54 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
drksky
Senior Heliman
Location: Bloomington, Illinois

My Posts This: Topic  Forum		Yup, just checked and they're black hex-heads. Guess I'm Ok
02-25-2006 07:38 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
Ozydego
Key Veteran
Location: Westerville, Ohio

My Posts This: Topic  Forum		golden!!

But Honey, I can't live with just stock.....
02-25-2006 08:41 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
tcfrum323
Senior Heliman
Location: Los Angeles CA

My Posts This: Topic  Forum		Mine just flew off today

During my 2nd flight with my SE today, as I was coming down to a hover of about 2 ft I heard a pop and something flew by me. The tail started to spin so I set her down. As she touched down the carbon rod for the rudder servo plops down rite by me. I picked it up and walked up to the helicopter to find that one of the rudder blade and blade holder gone. The rod had snapped off the end links that connect to the servo and tail rotor assembly. The belt was loose now. Not exactly sure what happened but I'm grounded now until I get replacement parts.
02-27-2006 06:24 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
10 pages [ <<    <     6      7     ( 8 )     9      10     NEXT    >> ]35489 viewsTOPIC CLOSED
Boca Bearings . XHELI.COM . Autography FlightPower

.
.
e-Align T-REX 250-450-500-600 > IMPORTANT - SE Tail Hub - HS1127
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 8:31 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF