RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 825 ONLINE 80 EVENTS SEARCH REGISTER  START HERE
 
7 pages [ <<    <     1      2     ( 3 )     4      5     NEXT    >> ]12879 viewsPOST REPLY
Mikado Modellhubschrauber . Futaba-RC . Boca Bearings

.
.
Scale Model RC Helicopters > FOUND!!! .30 JEt Ranger Fuselage Cheap!!!
 
 
nipmuck2
Senior Heliman
Location: Massachusetts

My Posts This: Topic  Forum

here are a couple of pics in flight with this fuse. It flies great and quite stable
10-04-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
BarracudaHockey
rrMaster
Location: Jacksonville FL

My Posts This: Topic  Forum		Looks good nip. I need to get off my can and get mine finished. Its tough though when the weekends have been such good flying weather.


AMA 77227
http://www.jaxrc.com
10-05-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ScaleBrad
Senior Heliman
Location: Longwood, FL USA

My Posts This: Topic  Forum		Great job getting it flying already!!! I still have to fine tune mine, slowly getting to it........
10-06-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
jrvander
Veteran
Location: Rockville, MD

My Posts This: Topic  Forum		Hi!
does anyone know if this jet ranger body will work with an Ikarus Eco 8? I'm sure there's a few mods that will have to be done, but is it close enoughto try or should I dump the money into the $140 Ikarus version? thanks!
- Jon

(funny quote here)
10-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Jgiang
Veteran
Location: Raleigh, the city in the park.... :)

My Posts This: Topic  Forum		Finally, mine version of JetRanger is here.










more in the gallery. This Jet Ranger have Hawk Pro mechanic with SE frame installed converted from Hawksport version. The muffler is the stock shuttle plus. the Rocket and machine gun are from the Night Ops AH-6.


It was in the air, but now it's on the ground. :)
10-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
RadioRob
Veteran
Location: Schaumburg Illinois USA

My Posts This: Topic  Forum		Could you use just a Hawk sport mechanics with that fuse?


Rob...
10-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Jgiang
Veteran
Location: Raleigh, the city in the park.... :)

My Posts This: Topic  Forum		yes, you can but with some modification.


It was in the air, but now it's on the ground. :)
10-10-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
RadioRob
Veteran
Location: Schaumburg Illinois USA

My Posts This: Topic  Forum		What kind of modification?

Rob...
10-11-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Jgiang
Veteran
Location: Raleigh, the city in the park.... :)

My Posts This: Topic  Forum		frame is longer and higher, so you have to take the rx tray off and cut the opening for the rotor head.


It was in the air, but now it's on the ground. :)
10-11-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
littlepiston
Senior Heliman
Location: Carlsbad, New Mexico

My Posts This: Topic  Forum		i need the mesurments on the horazontal fins ,, were can you buy them ,, i just got a kyosho jet ranger frp fuse and it was missing them fins i would like to know if you can buy replacments for the this jet ranger body and if they will fit the kyosho one,, they look identical
10-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ScaleBrad
Senior Heliman
Location: Longwood, FL USA

My Posts This: Topic  Forum		I saw a picture of that Kyosho fuse..and I think the fuse shown here is a chinese copy of the Kyosho one. I doubt you can buy the fins separately though.
10-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
littlepiston
Senior Heliman
Location: Carlsbad, New Mexico

My Posts This: Topic  Forum		Doh!!!!!!!!!
10-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Supersix
Senior Heliman
Location: Sydney Australia

My Posts This: Topic  Forum
Quote 
How about a venture 30? Or am i asking to much?

here is mine http://www.scalerchelis.com/forum/i...?showtopic=4692 that i have put a venture 30 into i have made extras like cable cutters, turbine exhaust's ,lights and different skids i am almost finished and ready to repaint it like a australian army heli i am also thinking of putting in a 50 size engine. i also fitted the srceen on the inside. the one flying in the link is my lhs one and it is a stock venture 30

"May the force be with you"
10-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
wilerbee
Senior Heliman
Location: Hong Kong

My Posts This: Topic  Forum		Here's mine in NYPD colours with shuttle mechanics and OS 37. I only paid 12 bucks for the body !!!
10-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ScaleBrad
Senior Heliman
Location: Longwood, FL USA

My Posts This: Topic  Forum		Your NYPD heli looks great!! Where did you get the lettering from?
12-23-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
burl
Senior Heliman
Location: Neah Bay, WA

My Posts This: Topic  Forum		How do you keep the two halves fastened together?
screws?
How do you fasten the winglets on the tail boom?
epoxy? screws?
When you have to access the mechanics, how do you open up and service?
remove one half?
12-23-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
dejavu
Heliman
Location: Joliet, IL

My Posts This: Topic  Forum		Hello all, I am new to the field but very interested in purchasing the scale jet ranger fuselage. Just one question, will it fit a raptor 30 v.2? Ok two questions, does it come with the tail piece? thanks
12-24-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
nipmuck2
Senior Heliman
Location: Massachusetts

My Posts This: Topic  Forum		Burl, the 2 halves are secured with screws and the vertical fin is attached to the tail case the same way you would if you were not using a fuselage. No epoxy there. To get to the mechanics you unscrew the two halves, (and in my case I have to remove the head first because I am using Hawk mechanics.) It's not that complicated once you get everything set up

dejavu, this particular fuse did not work well with my Raptor unless I did some modification to the pitch arm. I did not want to do that and I had a Hawk and the mechanics just dropped right in with little problems. The fuselage is only $56.00 (unpainted) and a good starter for the money. It does come with horizontal and vertical fin. If you don't want to paint it Callie Graphics is your best solution

all work and no play= dull; all play and no work= broke. gotta balance!
12-24-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
wilerbee
Senior Heliman
Location: Hong Kong

My Posts This: Topic  Forum		The lettering are off the shelf vinyl letter sets from the stationary shop. I forgot the brand name but they are from Germany. I actual use the lettering as stencils. I apply the lettering before painting and after spraying just peel off the letterings and Presto !! It helps too that the fuse comes in white.
12-24-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ScaleBrad
Senior Heliman
Location: Longwood, FL USA

My Posts This: Topic  Forum		Thanks for the info. Lettering came out great!!! I'm going to paint mine in the LAPD fire dept. scheme
12-24-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
7 pages [ <<    <     1      2     ( 3 )     4      5     NEXT    >> ]12879 viewsPOST REPLY
XHELI.COM . Advantage Hobby . Revolution Models

.
.
Scale Model RC Helicopters > FOUND!!! .30 JEt Ranger Fuselage Cheap!!!
 Print TOPIC Advertisers 

Subscribe to This Topic

Friday, March 19 - 3:10 am - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF