RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 404 ONLINE 80 EVENTS SEARCH REGISTER  START HERE
 
1 page634 viewsPOST REPLY
Mikado Modellhubschrauber . Futaba-RC . Boca Bearings

.
.
e-E-Flite Blade MSR SR CP CX MCX 400-3D > Running li-poly on blade cp
 
 
tienman04
Senior Heliman
Location: Silver sping. MD

My Posts This: Topic  Forum		iam flying my blade cp and it seems to be a very good heli to practice hovering on but my stock battery lasts only about 5 min. I was wondering if i can run a 11.1v 1900mah thunder power li-poly on it? The recommended it 1320. The stock battery weights just about the same as the 1900mah battery. Do i have to change out the motor with the 9t to run the li-poly? thnks
07-05-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Betofazzo
Veteran
Location: Venezuela

My Posts This: Topic  Forum		3 cell lipo on Blade Cp.

Hi.. you need a 8 tooth pinion or possible 9 for main motor (you will use the same blades), put both heat sink, and run whit 3 cell batt (800-1320 mah recomended, or another batt not too heavy), you will fly more than 10-12 minutes).
hope this help.

I'm charging batteries....
07-05-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
tienman04
Senior Heliman
Location: Silver sping. MD

My Posts This: Topic  Forum		the 11.1v 1900mah is around 141 grams. Is this too heavy?
07-05-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Betofazzo
Veteran
Location: Venezuela

My Posts This: Topic  Forum		The battery..

I think probably too heavy for this litle heli, this battery work fine in the zoom or t-rex heli, thp 1320 (weight about 91 gr) and other similar (E-Tec 1250, 85 gr) are recomended in the owner's manual (weight to power ratio), but you can try, adjust the cg and go..

I'm charging batteries....
07-06-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page634 viewsPOST REPLY
XHELI.COM . Advantage Hobby . Revolution Models

.
.
e-E-Flite Blade MSR SR CP CX MCX 400-3D > Running li-poly on blade cp
 Print TOPIC Advertisers 

Subscribe to This Topic

Saturday, March 20 - 10:45 am - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF