RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 758 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page250 viewsPOST REPLY
Heli-Max . Hobby Hut . Heli Wholesaler

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > fan removal on Avant(x-spec)
 
 
carcrasher
Key Veteran
Location: east coast

My Posts This: Topic  Forum		I'm trying to remove the fan to change out the rear bearing in my c-spec and I can't get the fan off. I tried heating it with a heat gun then turning it, I tried using two bolts where the clutch mounts and useing a wrench to turn it. It twisted the bolts. I even bent the fins on the fan before it even budged. Any suggestions? My next step is to place the engine in the oven, fan and all to see if that helps. i'll have to get a new fan anyway.
06-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
AndyH
Key Veteran
Location: San Diego, CA

My Posts This: Topic  Forum		Go to the local auto parts store and get a cheap, small gear puller, slip the jaws under the fan and crank the screw, and wham - the fan comes right off!

06-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
TMoore
rrProfessor
Location: Cookeville, TN

My Posts This: Topic  Forum		Don't put the engine in the oven. Take a brass rod and a small hammer and tap the end of the crank. This will get the engine off of the fan and break the lower collet loose.

BTW, when you put it back together, don't use loctite. It isn't needed.

TM
06-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
white chocolate
Key Veteran
Location: Baltimore, Md.

My Posts This: Topic  Forum		Heat the collet thats around the crankshaft in the fan. Then put the whole thing in a vise. Open the vise so you can sit the fan on the two ends. Then just do the same thing Terry said. I use a phillips screw driver. Give it two hard shots and its out. For future reference, Hirobo has a fan puller now. Similar to the xcell one. 2513-034

Team Raptor
Radix
SMC Batteries
TEAM MAPTERGY...Definitely nuff said.....
06-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
bobkins
Senior Heliman
Location: Bocholt, Belgium

My Posts This: Topic  Forum		Hi

Did you use red loctite? Because that was what I did with my shuttle. I am not really sure if it is the same but if it is then a hairdryer should solve youre problem, heat the inside of your flywheel and lock the crank, when it is to hot to touch use a straptype wrench. This worked for me but I did need my dad to hold the engine.

Greetz Rob
06-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page250 viewsPOST REPLY
JR-Spektrum . E-flite . Fast Lad Performance

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > fan removal on Avant(x-spec)
 
 
carcrasher
Key Veteran
Location: east coast

My Posts This: Topic  Forum		Thanks for the suggestions. I didn't use red loctite only blue on the threads for the nut. I'll give it a go again to see what happens.
06-26-2005 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page250 viewsPOST REPLY
Heli-Max . Hobby Hut . Heli Wholesaler

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > fan removal on Avant(x-spec)
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, November 22 - 10:11 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF