sir777
Senior Heliman
Location: Moscow, Russia + Lloret de Mar (Girona), Spain
My Posts This: Topic Forum | I can adjust it so, that in normal mode it doesn't drift, but that point seems to be very far (the distance between the tail case and the pitch slider is about 12-13mm or more!!! I am not sure exactly, but is much more than 8-9 mm as said here in runryder) and I have 145% limit to the left on servo and it still doesn't touch the wall (so it doesn't have full travel) and much less than 100% limit to the right, so that there is no binding. I can use smaller servo arm (I used as recommended in manual) to make my right limit more, but then I will have much less throw to the left, or bigger servo arm, but then the problem will be, that I have more throw to the left, but will have to put less limit to the right, while it is already very small. And these shakes only happen when doing piros to the right, because to the left much more slower. The heli itself shakes for a second or two after stoppping the piro. I don't the right word for that king of shake, but maybe wooble??? It seems to me that it comes from the head and then transfers to the frame and other parts of the heli. I am a bit confused about all these things. I can just put it in hh mode and it will hold fine most of time, but sometimes it seems to go away... |
