RunRyder RC Helicopter Topic - The new nastiness

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 849 ONLINE 18 EVENTS SEARCH REGISTER START HERE

2 pages [ << < 1 ( 2 ) > >> ]

1557 views

POST REPLY

Fast Lad Performance	.	Ace Hobby	.	Esprit Model
	.		.

HIROBO Turbulence - SDX - Freya - Sceadu > The new nastiness

mkeigwin
Senior Heliman
Location: Marietta GA usa

My Posts This: Topic Forum

ron you still have the old header the one on this heli is not the same you had one the fury, how much for it .

Trex 600Pro
TTRed Line 53
ATG
Solid G
9252's
12 FGH

06-16-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Ron Henry
Senior Heliman
Location: Atlanta area, GA - USA

My Posts This: Topic Forum

I'm running the revmax... The headspeed last time I tached it was 1886. I didn't use the hatori 632 header. I would recommend getting the zimmerman header. The hatori header is a bit on the short side at 150mm where the zimmerman is 180. I took abot 15mm off of my zimmerman header and left it alone. The engine makes a tremendous ammount of power and falls off the pipe better than the muscle pipe when you shoot autos. The 970, 30% and a revmax == evil combination.

Hey mike I sold the header along with the Fury. The guy that bought it really wanted it so I folded. That pipe setup is all that I'll run on my helis from now on. It's the best of both world. I weighed it and then the SB-17 and my setup comes in about 2 ounces heavier. I'll take that as a tradeoff given the power it makes...

- Ron Henry
http://kaizenrc.com/forum

06-17-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Ron Henry
Senior Heliman
Location: Atlanta area, GA - USA

My Posts This: Topic Forum

Mike yep... I'm planning on being at CCRC this weekend. I gotta do some work on the engine and test the changes out tomorrow. Depending on how that goes will dictate if I can make it or not...

- Ron Henry
http://kaizenrc.com/forum

06-17-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Agilefalcon
Veteran
Location: Fort Worth, Texas

My Posts This: Topic Forum

The Hatori 970 is readily available in the US from Century Heli. I've got two of them and have been using them for over two years. Do not use the Hatori header, it is far too short.

If you are truly interested in using this pipe for 3D with a C-Spec or Webra, research some of the articles I've posted on Runryder. I go into great detail about how to set this pipe up.

Properly set up, you don't need a governor or 30% nitro. It makes incredible TORQUE that will see you through just about any maneuver.

If you need further information, send me a PM. I am also using the Zimmermann 90 quiet pipe with excellent results.

Chris.

Chris Berardi
MRC/Hirobo Flight Team
Byron Fuels Rotor Rage Team
MAH Blades

06-17-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

I3DM
rrProfessor
Location: Israel

My Posts This: Topic Forum

OK guys, now you got me thinking... i thought i ditched the long tuned pipes when i sold my last 61WC, but maybe not hehe...

Ron, is this the correct header for the Fury ?

www.liorzahavi.com

06-17-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

Ron Henry
Senior Heliman
Location: Atlanta area, GA - USA

My Posts This: Topic Forum

Yep... That's the one...

- Ron Henry
http://kaizenrc.com/forum

06-17-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Dr Lodge
Elite Veteran
Location: Guildford, Surrey - UK

My Posts This: Topic Forum

Fuel Consumption

What's the fuel consumption like with you guys running the 970? I'm getting 10 mins on a 600cc fuel tank, OS91PS and 15% nitro which seems a bit thirsty to me.

Vibe 90, Vibe 50, Vigor CS x2,
Dyna-x, Knight 503D, Logo 10,
TRex 500, Furion, Gaui EP200

06-17-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

Ron Henry
Senior Heliman
Location: Atlanta area, GA - USA

My Posts This: Topic Forum

Mmm it depends on the kind of flying that I'm doing but 10 - 12 minutes sounds about right. I run a header tank as well, so that's probably another minute or so... The big blocks chew up the fuel.

- Ron Henry
http://kaizenrc.com/forum

06-17-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE GALLERY

Dr Lodge
Elite Veteran
Location: Guildford, Surrey - UK

My Posts This: Topic Forum

I've got a header tank too so might stretch to 12 minutes with that.

Thanks!

Vibe 90, Vibe 50, Vigor CS x2,
Dyna-x, Knight 503D, Logo 10,
TRex 500, Furion, Gaui EP200

06-17-2005 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

2 pages [ << < 1 ( 2 ) > >> ]

1557 views

POST REPLY

Thunder Power RC	.	Mikado Modellhubschrauber	.	Futaba-RC
	.		.

HIROBO Turbulence - SDX - Freya - Sceadu > The new nastiness

Print TOPIC

Advertisers

Subscribe to This Topic